Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 45 05sienna 12

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download 12 documenatation <<

Text preview - extract from the document

05 SIENNA_U (L/O 0409)

SECTION 1- 2
OPERATION OF INSTRUMENTS AND
CONTROLS
Keys and Doors
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Engine immobilizer system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Wireless remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Front doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Sliding doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Power sliding doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Back door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Power back door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Manual quarter windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Power quarter windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Theft deterrent system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Fuel tank cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Electric moon roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Keys (without engine Keys (with engine immobilizer
immobilizer system) system)

Your vehicle is supplied with two kinds KEY NUMBER PLATE Your vehicle is supplied with two kinds
of keys. Your key number is shown on the plate. of keys.
1. Master keys--These keys work in ev- Keep the plate in a safe place such as 1. Master keys (black)--These keys work
ery lock. your wallet, not in the vehicle. in every lock. Your Toyota dealer will
2. Sub key--This key will not work in the If you should lose your keys or if you need one of them to make a new key
glove box. need additional keys, duplicates can be with a built- in transponder chip.

To protect items locked in the glove box made by a Toyota dealer using the key 2. Sub key (gray)--This key will not work
when using valet parking, leave the sub number. in the glove box.
key with the attendant. We recommend writing down the key num- A transponder chip for engine immobilizer
Since the front doors and sliding doors ber and storing it in a safe place. system has been placed in the head of
can be locked without a key, you should the master and sub keys. These chips are
always carry a spare master key in case needed to enable the system to function
you accidentally lock your keys inside the correctly, so be careful not to lose these
vehicle. keys. If you make your own duplicate key,
you will not be able to cancel the system
or start the engine.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

To protect items locked in the glove box
when using valet parking, leave the sub
key with the attendant.
Since the front doors and sliding doors
can be locked without a key, you should
always carry a spare master key in case
you accidentally lock your keys inside the
vehicle.

NOTICE z When starting the engine, do not
use the key with other transponder
When using a key containing a trans-
keys around (including keys of oth-
ponder chip, observe the following er vehicles) and do not press other
precautions:
key plates against the key grip.
z When starting the engine, do not Otherwise the engine may not start,
use the key with a key ring resting or may stop soon after it starts. If
on the key grip and do not press this happens, remove the key once
the key ring against the key grip. and then insert it again after remov-
Otherwise the engine may not start, ing other transponder keys (includ-
or may stop soon after it starts. ing keys of other vehicles) from the
ring or while gripping or covering
them with your hand to start the
engine.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

z Do not cover the key grip with any
material that cuts off electromagnet-
ic waves.
z Do not knock the key hard against
other objects.
z Do not leave the key exposed to
high temperatures for a long period,
such as on the dashboard and hood
under direct sunlight.
z Do not put the key in water or
wash it in an ultrasonic washer.
z Do not use the key with electromag-
netic materials. KEY NUMBER PLATE
z Do not bend the key grip.
Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.
If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
number.
We recommend writing down the key num-
ber and storing it in a safe place.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Engine immobilizer system
Inserting the registered key in the ignition
switch automatically cancels the system,
which enables the engine to start. The
indicator light will go off.
For your Toyota dealer to make you a
new key with built- in transponder chip,
your dealer will need your key number
and master key. However, there is a limit
to the number of additional keys your
Toyota dealer can make for you.
If you make your own duplicate key,
you will not be able to cancel the sys-
tem or start the engine.
The engine immobilizer system is a The system is automatically set when the
NOTICE
theft prevention system. When you in- key is removed from the ignition switch.
sert the key in the ignition switch, the The indicator light will start flashing to Do not modify, remove or disas-
transponder chip in the key's head show the system is set. semble the engine immobilizer sys-
transmits an electronic code to the ve- If any of the following indicator conditions tem. If any unauthorized changes or
hicle. The engine will start only when occurs, contact your Toyota dealer. modifications are made, proper opera-
the electronic code in the chip corre- tion of the system cannot be guaran-
sponds to the registered ID code for D The indicator light stays on except teed.
the vehicle. when the theft deterrent system is set-
ting or activating. (See "Theft deterrent
system" on page 48 in this Section.)
D The indicator light does not start flash-
ing when the key is removed from the
ignition switch.
D The indicator light flashes inconsistent-
ly.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Wireless remote control--
For vehicles sold in U.S.A. For vehicles sold in Canada

FCC ID: MOZ RI- 21BTY This device complies with RSS- 210 of
MADE IN U.S.A. Industry Canada. Operation is subject to
This device complies with Part 15 of the the following two conditions:
FCC Rules. Operation is subject to the (1) This device may not cause interfer-
following two conditions: ence, and (2) this device must accept
(1) This device may not cause harmful any interference, including interference
interference, and (2) this device must that may cause undesired operation of
accept any interference received, includ- the device.
ing interference that may cause unde-
sired operation.

Type A
CAUTION

Changes or modifications not ex-
pressly approved by the party respon-
sible for compliance could void the
user's authority to operate the equip-
ment.

Type B

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

The wireless remote control system is If the wireless remote control transmitter
designed to lock or unlock all the side does not actuate the doors or alarm, or
doors and back door, or activate the operate from a normal distance:
panic mode from a distance within D Check for closeness to a radio trans-
approximately 1 m (3 ft.) of the vehicle. mitter such as a radio station or an
On some models, the system also al- airport which can interfere with normal
lows you to activate the theft deterrent operation of the transmitter.
system from the same distance.
D The battery may have been consumed.
When you operate any switch, push it Check the battery in the transmitter. To
slowly and securely. replace the battery, see "--Replacing
The wireless remote control transmitter is battery" on page 20.
an electronic component. Observe the fol- If you lose your wireless remote control
lowing instructions in order not to cause transmitter, contact your Toyota dealer as
Type C damage to the wireless remote control soon as possible to avoid the possibility
transmitter. of theft, or an accident. (See "If you lose
1. Lock switch D Do not leave the transmitter in places your wireless remote control transmitter"
2. Unlock switch where the temperature becomes high on page 439 in Section 4.)
such as on the dashboard.
3. Sliding door open switch (right side)
D Do not disassemble it. MADE IN U.S.A.
4. Sliding door open switch (left side)
D Avoid knocking it hard against other This complies with Part 15 of the FCC
5. Back door open switch objects or dropping it. rules. Operation is subject to the follow-
6. Alarm switch ing two conditions:
D Avoid putting it in water.
(1) This device may not cause harmful
You can use up to 4 wireless remote con- interference, and (2) this device must
trol transmitters for the same vehicle. accept any interference received, includ-
Contact your Toyota dealer for detailed ing interference that may cause unde-
information. sired operation.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

--Locking and unlocking
doors
To lock and unlock all the doors, push
the switches of the transmitter slowly
and securely.
To lock: Push the lock switch. All the side
doors and back door are locked simulta-
neously. At this time one beep will be
heard, turn signal lights will flash once.
Check to see that the doors are securely
locked.
If any of the side doors or back door is
not securely closed, or if the key is in the
ignition switch, locking cannot be per-
formed by the lock switch and a beep will
Locking operation (type A) Locking operation (type B or C)
sound continuously for 10 seconds. How-
ever, if the key is in the ignition, a beep
will not sound.
To stop the beep, close all the side doors
and back door securely or push the un-
lock switch.
The buzzer can be disabled. For details,
contact your Toyota dealer.
To unlock: Push the unlock switch once to
unlock only the driver's door. Pushing the
switch twice within 3 seconds unlocks all
the side doors and back door simulta-
neously. Each time the unlock switch is
pushed, two beeps will be heard, turn sig-
Unlocking operation (type A) Unlocking operation (type B or C) nal lights will flash twice.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

--Opening and closing sliding
doors
This double switch operation to unlock all The following adjustments can be made in
the side doors and back door can be this system. For details, contact your
changed to a single switch operation. For Toyota dealer.
details, contact your Toyota dealer. D Cancelling the wireless door locking or
When the unlock switch is pressed, the unlocking function
front personal lights and ignition switch D Cancelling the flash of the turn signal
light come on. The lights remains on for lights
about 15 seconds unless any of the side
doors or back door are opened then and D Cancelling the beep sound
closed. (For further information, see "Front
personal lights" on page 164 and/or "Igni-
tion switch light" on page 166 in Section
1- 5.)
You have 30 seconds to open a door after Right side power sliding door (type A)
using the wireless remote unlock feature.
If a door is not opened by then, all the
side doors and back door will automatical-
ly lock again.
The timing for the automatic door lock
function can be changed. For details, con-
tact your Toyota dealer.
If the lock or unlock switch is kept
pressed in, the locking or unlocking opera-
tion is not repeated. Release the switch
and then push again.

Right side power sliding door
(type B or C)

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Opening operation can be performed by The sliding door operation by the wireless
the switches under the following conditions remote control can be changed or dis-
only: abled. For details, contact your Toyota
D The sliding door is unlocked. dealer.
D The power sliding door system is on.
(The "SLIDE DOOR OFF" switch on the
instrument panel is pushed out.)
D The key is not in the ignition switch.
D The sliding door is between the fully-
closed position and half- opened posi-
tion.
The sliding door stops at the half- opened
Left side power sliding door (type C only) position when the window is opened more
than about 15 cm (6 in.).
Push and hold the switch of the wire- The left side power sliding door does not
less remote control transmitter about operate when the fuel filler door is
one second. The power sliding door opened.
opens and closes completely.
Closing operation can be performed by the
Right side power sliding door-- wireless remote control switches under the
To open: Push the sliding door open following conditions only:
switch. (right side) D The power sliding door system is on.
To close: Push the sliding door open (The "SLIDE DOOR OFF" switch on the
switch (right side) again. instrument panel is pushed out.)
Left side power sliding door-- D The key is not in the ignition switch.
To open: Push the sliding door open D The sliding door is between the fully-
switch. (left side) opened position and half- opened posi-
To close: Push the sliding door open tion.
switch (left side) again.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

--Opening and closing back
door (type B and C)
Push and hold the back door open The back door operation by the wireless
switch on the wireless remote control remote control can be changed or dis-
transmitter for about one second. The abled. For details, contact your Toyota
power back door opens and closes dealer.
completely.
When closing or opening the back door,
two beeps will be heard and the turn sig-
nal lights will flash twice.
Opening operation can be performed by
the switch under the following conditions
only:
D The back door is unlocked.
Type B D The power back door system is on.
(The "BACK DOOR OFF" switch on the
instrument panel is pushed out.)
D The key is not in the ignition switch.
D The back door is between the fully-
closed position and half- opened posi-
tion.
Closing operation can be performed by the
switch under the following conditions only:
D The power back door system is on.
(The "BACK DOOR OFF" switch on the
instrument panel is pushed out.)
D The key is not in the ignition switch.
D The back door is between the fully-
Type C opened position and half- opened posi-
tion.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

--Activating alarm --Replacing battery
The alarm does not work when the ignition For replacement, use a CR2032 lithium
key is in the "ON" position. battery or equivalent.
This alarm function can be disabled. For
details, contact your Toyota dealer. CAUTION

Special care should be taken to pre-
vent small children from swallowing
the removed transmitter battery or
components.

NOTICE
z When replacing the transmitter bat-
Pushing and holding the alarm switch tery, be careful not to lose the com-
blows the horn intermittently and ponents.
flashes the headlights, tail lights and z Replace only with the same or
turns on the front personal lights. equivalent type recommended by a
The alarm switch is used to deter vehicle Toyota dealer.
theft when you witness anyone attempting z Dispose of used batteries according
to break into or damage your vehicle. to the local laws.
The alarm will last for one minute. To stop
alarm midway, do the following: Replace the transmitter battery by follow-
D Push any of the switch on the wireless ing these procedures:
remote control transmitter.
D Lock or unlock either front doors or
back door with the key.
D Turn the ignition key from the "LOCK"
to "ON" position.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

1. Using a coin or equivalent, open the 2. Remove the discharged transmitter bat- 3. Put in a new transmitter battery with
transmitter case. tery. positive (+) side up.
Close the transmitter case securely.
NOTICE
Do not bend the terminals. NOTICE
z Make sure the positive side and
negative side of the transmitter bat-
tery are faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Front doors
When either front door is unlocked with a
z Be careful not to bend the electrode key, the front personal lights and ignition
when inserting the transmitter bat- switch light will come on and remain on
tery and that dust or oils do not for about 15 seconds before fading out.
adhere to the transmitter case. (For details, see "Front personal lights" on
z Close the transmitter case securely. page 164 and "Ignition switch light" on
page 166 in Section 1- 5.)
After replacing battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.

LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and turn
it.
To lock: Turn the key forward.
To unlock: Turn the key backward.
All the side doors and back door lock and
unlock simultaneously with either front
door. In the driver's door lock, turning the
key once will unlock the driver's door and
twice in succession will unlock all the
doors simultaneously.
This double key turning operation to un-
lock all the side doors and back door can
be changed to a single key turning opera-
tion. For details, contact your Toyota deal-
er.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

CAUTION

Do not pull the inside handle of the
front doors while driving. The doors
will open and an accident may occur.
Toyota strongly recommends that all
children be placed in the rear seat of
the vehicle.

Closing the door with the lock knob in the
lock position will also lock the door. Be
careful not to lock your keys in the ve-
hicle. Driver's side
LOCKING AND UNLOCKING WITH The front doors cannot be locked if you
INSIDE LOCK KNOB leave the key in the ignition switch.
Move the lock knob.
To lock: Push the knob forward.
To unlock: Pull the knob backward.
The front doors can be opened by pulling
the inside handles even if the lock knobs
are in the locked position.

Front passenger's side

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

--Automatic door locking and
unlocking functions
LOCKING AND UNLOCKING WITH The power door lock switch can be reset You can set the following auto door
POWER DOOR LOCK SWITCH in the following ways. locking and unlocking functions.
Push the switch. D Turn the ignition key to "ON". (a) Locking linked with the shift posi-
To lock: Push the switch down on the D Unlock all the side doors and back tion
front side. door with the key or wireless remote All the side doors and back door are
To unlock: Push the switch down on the control transmitter. locked automatically when the selector le-
rear side. D Unlock the driver's door or front pas- ver is moved out of the "P" position with
Operating the switch simultaneously locks senger's door with the inside lock the ignition switch in the "ON" position.
or unlocks all the side doors and back knob, and then unlock all the doors (b) Unlocking linked with the shift posi-
door. and back door with the power door tion
If you do either of the following, no side lock switch. All the side doors and back door are un-
door or back door can be unlocked with locked automatically when the selector le-
the power door lock switch. CAUTION ver is moved to the "P" position with the
D Lock all the side doors and back door ignition switch in the "ON" position.
Before driving, be sure that the doors
with the key or wireless remote control (c) Locking linked with the vehicle
are closed and locked, especially
transmitter when all the side doors and speed
when small children are in the ve-
back door are closed. hicle. Along with the proper use of All the side doors and back door are
D Open the driver's door or front passen- seat belts, locking the doors helps locked automatically when the vehicle
ger's door and move the inside lock prevent the driver and passengers speed reaches 20 km/h (12 mph) or high-
knobs of both front doors to the lock from being thrown out from the ve- er. However, if any door is unlocked dur-
position, then close the front doors. hicle during an accident. It also helps ing driving, this auto locking function will
prevent the doors from being opened not operate until the unlocked door is
unintentionally. opened once.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Sliding doors (non- powered)
(d) Unlocking linked with opening the D To set function (d)
driver's door Push and hold the rear of the driver's
All the side doors and back door are un- side power door lock switch for 5 sec-
locked automatically when the driver's onds with the selector lever in any
door is opened within 10 seconds after position except "P".
the ignition switch is turned from "ON" to All the side doors and back door automati-
the "ACC" or "LOCK" position. cally lock and unlock when you release
Setting the functions the power door lock switch. This indicates
that the function is set. If all the doors do
1. Close all the side doors and back door. not lock and unlock, the time the switch
2. Turn the ignition switch to the "ON" was held may have been too short or too
position. long. Perform the procedure over again
3. Within 10 seconds after the ignition starting from step 1.
switch is turned to the "ON" position; If you want to cancel a function, repeat
LOCKING AND UNLOCKING WITH
D To set function (a) the procedure. Each time you perform the INSIDE LOCK KNOB
Push and hold the front of the driver's procedure, the function is set or can-
celled. Move the lock knob.
side power door lock switch for 5 sec-
onds with the selector lever in the "P" To lock: Move the knob forward.
position. To unlock: Move the knob backward.
D To set function (b) Closing the sliding door with the lock knob
Push and hold the rear of the driver's in the lock position will also lock the slid-
side power door lock switch for 5 sec- ing door. Be careful not to lock your keys
onds with the selector lever in the "P" in the vehicle.
position.
D To set function (c)
Push and hold the front of the driver's
side power door lock switch for 5 sec-
onds with the selector lever in any
position except "P".

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

CLOSING THE FULLY- OPENED SLIDING
DOOR D When stopping on a downward
slope, open the door fully while
To close the fully- opened sliding door, pull
passengers are getting on or off.
the inside or outside handle and then Do not pull the outside handle or
close the door.
inside handle while the door is
open as the door could suddenly
CAUTION close by itself causing injury.

Before driving, be sure that the doors
are closed and locked, especially NOTICE
when small children are in the ve-
hicle. Along with the proper use of Do not close the sliding door by ap-
seat belts, locking the doors helps plying the brakes. Doing so could
prevent the passengers from being cause the door to be damaged.
thrown out from the vehicle during an
CAUTION
accident. It also helps prevent the
doors from being opened unintention- D When closing the sliding door, con-
ally.
firm safety of the area around.
Keep the heads, hands and other
parts of the bodies of all occupants
away from the sliding door. Other-
wise, the closing door may cause
an unexpected serious injury.
D When the vehicle is stopped on a
slope, the door will slide faster
when opening or closing, so be es-
pecially careful that the passengers
do not get hit or pinched by the
door.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

When the fuel filler door is opened, the When the sliding door window is SLIDING DOOR CHILD- PROTECTORS
left side siding door will not open. opened more than about 15 cm (6 in.), Open the sliding door fully and move
Close the fuel filler door securely and the sliding door will stop at half- the lock lever to the "LOCK" position
then operate the sliding door. opened position for safety reasons. as shown on the label. Then close the
Close the window and then operate the sliding door.
NOTICE sliding door.
If the child- protector is locked, you cannot
Avoid forcibly opening the left side open the sliding door from the inside. We
CAUTION
sliding door fully when the fuel filler recommend using this feature whenever
door is opened. Otherwise, the fuel small children are in the vehicle.
Do not leave the sliding door at half-
filler door may be damaged.
opened position because the door is
not latched at this position. If the
vehicle is stopped on a downward
slope, it may move and cause an un-
expected injury.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

Power sliding doors--
When the power sliding door system is
NOTICE
on, you can open and close the sliding
door with the power sliding door switches When your vehicle goes through an
on the overhead console or wireless re- automatic car wash, make sure the
mote control transmitter even if the sliding power sliding door system is off.
On Off door child- protector is locked.
When the power sliding door system is
off, you can open and close the sliding
door by the same operations as non- pow-
ered sliding door.
The sliding door closer is operative even
if the power sliding door system is off.
See page 32 about sliding door closer.
POWER SLIDING DOOR MAIN SWITCH
("SLIDE DOOR OFF" switch) CAUTION
This switch is used to turn on and off D Do not leave small children or pets
the power sliding door system. In order unattended in your vehicle. They
to operate the power sliding door, the could operate the power sliding
"SLIDE DOOR OFF" switch on the in- door and injure themselves or oth-
strument panel must be pushed out. ers. Turn off the power sliding door
(The orange line on the top of the system when the power sliding door
switch indicates that the power sliding is not in use.
door system is on.) To disable the pow-
er sliding door feature, push in the D When jacking up the vehicle, turn
switch. off the power sliding door system
and close the sliding door com-
pletely.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

--Operation of power sliding
door
The power sliding door can be operated
CAUTION automatically in the following ways:

Before driving, be sure that the doors
D Operates with the power sliding door
switches inside the vehicle
are closed and locked, especially
when small children are in the ve- D Operates with the wireless remote con-
hicle. Along with the proper use of trol transmitter
seat belts, locking the doors helps D Assists operation with the outside or
prevent the passengers from being inside handle by hand
thrown out from the vehicle during an
The power sliding door system can be
accident. It also helps prevent the
canceled by the "SLIDE DOOR OFF"
doors from being opened unintention-
ally. switch.
When the power sliding door system is
on, if you shift out of "P" with the ignition
LOCKING AND UNLOCKING WITH
INSIDE LOCK KNOB key in the "ON" position and the sliding
door is not completely closed, a buzzer
Move the lock knob. will sound.
To lock: Move the knob forward.
To unlock: Move the knob backward. CAUTION
Closing the sliding door with the lock knob
in the lock position will also lock the slid- D Careful attention is needed so as
ing door. Be careful not to lock your keys not to get your fingers trapped as
in the vehicle. the sliding door automatically opens
or closes.
D Never allow a child to operate the
sliding door.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

OPERATING WITH THE POWER SLIDING
NOTICE
DOOR SWITCHES
Do not apply excessive force when To open the door, push the switch. To
the sliding door is operated automati- close the door, push the switch once
cally. Otherwise, the power sliding again. The door opens and closes com-
door system may be damaged. pletely.
Switches on the front overhead con-
You can cause a beep to sound when the sole:
power sliding door is opened or closed.
For details, contact your Toyota dealer. " " switch--To operate the left side
door
" " switch--To operate the right side
Front overhead console door
Switches on the center pillar:
"PWR DOOR" switch--To operate each
side door
Opening operation can be performed by
the switches under the following condi-
tions:
D The sliding door is unlocked.
D The power sliding door system is on.
(The "SLIDE DOOR OFF" switch is
pushed out.)
D The sliding door is between the fully-
closed position and half- opened posi-
tion.
Center pillar

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

D When the ignition key is in the "ON" OPERATING WITH THE WIRELESS
position, the transmission selector lever CAUTION REMOTE CONTROL TRANSMITTER
must be in "P". To open or close the door, push the
If you shift the automatic transmis-
D The child- protector is unlocked.
sion selector lever out of "P" and " " or " " switches on the wire-
(switches on the center pillar only) less remote control transmitter about
accelerate before the power sliding
Closing operation can be performed by door is closed completely, the sliding one second. (Only when the power slid-
the switches under the following condi- door may reverse to the open posi- ing door system is on.) For details, see
tions: tion. A child or others could fall out "Wireless remote control" on page 14
D The power sliding door system is on. of the vehicle and be injured. Always in this Section.
(The "SLIDE DOOR OFF" switch is make sure the power sliding door is ASSISTS OPERATION WITH THE
pushed out.) closed and latched before you start OUTSIDE OR INSIDE HANDLE BY HAND
driving.
D The sliding door is between the fully- When the power sliding door system is on
opened position and half- opened posi- (the "SLIDE DOOR OFF" switch is pushed
tion. out), if you pull the outside handle or slide
Left and right side power sliding door the inside handle, the sliding door will
models--The left side power sliding door automatically and completely open or
does not operate when the fuel filler door close.
is opened. When the power sliding door system is
The length of time required to push the off, the sliding door can be operated
switches for operating the sliding door can manually by the outside or inside handle.
be changed. For details, contact your
Toyota dealer.

2005 SIENNA from Sep. '04 Prod. (OM45431U)
05 SIENNA_U (L/O 0409)

CLOSING THE FULLY- OPENED SLIDING Before operating the power sliding door,
DOOR make sure there is nobody near the slid-
To close the fully- opened sliding door, pull ing door. Make sure the sliding door stops
the inside or outside handle and then at the fully- opened position, and then al-
close the door. low the passengers to get in and out of
the vehicle.
Sliding door closer: When the sliding
door has not been fully closed, it is auto- The resistance must be as strong as the
matically closed completely even if the force of the moving door, or stronger. As
power sliding door system is off. the sliding door approaches the fully-
closed or fully- opened position, its moving
force increases significantly.
CAUTION
The jam protection function may not work
D Careful attention is needed so as if something gets caught just before the
not to get your fingers trapped as sliding door is fully closed.
JAM PROTECTION FUNCTION
the sliding door automatically If the sliding door receives a strong im-
closes when it has not been fully If anything with sufficient resistance ob-
pact, this function may operate even if
closed. structs the power sliding door while it is
nothing is caught.
closing or opening, the sliding door will
D Never allow a child to operate the automatically reverse to the opposite di-
sliding door. rection. However, if the power sliding door CAUTION
is between the half- opened and fully-
opened positions while it is opening, the The power sliding door could injure
NOTICE door will stop at that position. people if they are caught in the door
path. When using the power sli

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo