Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 40 20ut9 x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
76-9
EXTERIOR/INTERIOR TRIM - OUTSIDE MOULDING LH
OUTSIDE MOULDING LH
760VI-01
REPLACEMENT
HINT:
On the RH side, use the same procedures as on the LH side.
1. REMOVE OUTSIDE MOULDING LH
(a) Using a heat light, heat the moulding between 40 - 60_C
(104 - 140_F).
Protective NOTICE:
Tape Do not heat the moulding excessively.
(b) Tie both piano wire ends to a wooden block or a similar
object.
(c) Cut off the tape by pulling the piano wire and remove the
B50319 moulding with reference pins remaining on the moulding.
NOTICE:
S If reusing the moulding, take care not to damage the
moulding.
S Do not damage the body.
S Be careful of the reference pins on the moulding when
removing the moulding.
2. INSTALL OUTSIDE MOULDING LH
(a) Using a heat light, heat the mounting surface of the ve-
hicle body between 40 - 60_C (104 - 140_F).
NOTICE:
Do not heat the body excessively.
(b) Remove the tape from the vehicle body.
(c) Wipe off the stains with cleaner.
(d) Clean the moulding (if reusing the moulding).
(1) Using a heat light, heat the moulding between 20 -
30_C (68 - 86_F).
NOTICE:
Do not heat the moulding excessively.
(2) Remove the tape from the moulding.
(3) Wipe off the stains with cleaner.
(4) Apply new tape to the moulding, as shown in the il-
lustration.
Double-sided Tape
Pin
B67733
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3483
76-10
EXTERIOR/INTERIOR TRIM - OUTSIDE MOULDING LH
(e) Match the reference pins on the moulding with the refer-
ence holes on the vehicle body.
(f) Using a heat light, heat the vehicle body and moulding.
Heating temperature:
Body 40 - 60_C (104 - 140_F)
Moulding 20 - 30_C (68 - 86_F)
NOTICE:
Do not heat the body and moulding excessively.
(g) Release the peeling paper from the face of the moulding
and attach the moulding securely to the vehicle body.
NOTICE:
Be careful that dirt or foreign objects do not stick to adhe-
sive part when releasing the peeling paper.
(h) Push the moulding to the body.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3484
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo