Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 40 20uvl x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
EXTERIOR/INTERIOR TRIM - REAR DOOR WINDOW FRAME MOULDING 76-13
SUB-ASSY LH
REAR DOOR WINDOW FRAME MOULDING SUB-ASSY LH
760VK-02
REPLACEMENT
HINT:
On the RH side, use the same procedure as on the LH side.
1. REMOVE REAR DOOR WINDOW FRAME MOULDING
Claw SUB-ASSY LH
(a) Remove the screw.
(b) Using a heat light, heat the moulding between 40 - 60_C
(104 - 140_F).
NOTICE:
Do not heat the moulding excessively.
(c) Slide the moulding upward to remove the moulding.
B67634 NOTICE:
If reusing the moulding, take care not to damage the mould-
ing.
(2)
2. INSTALL REAR DOOR WINDOW FRAME MOULDING
Tape SUB-ASSY LH
(a) Using a shop rag, remove the tape from the moulding.
(b) Clean the contact surface of the vehicle body with a shop
rag saturated with white gasoline.
(c) Clean the outer circumference of the moulding with white
gasoline.
(d) Apply new double-sided tape to the moulding, as shown
Seal (1) in the illustration.
Sponge Dimension:
(1) 470.0 mm (18.504 in.)
Length (A)
(2) 43.0 mm (1.693 in.)
Double-sided Tape Width (B) 5.0 mm (0.197 in.)
Thickness (C) 0.6 mm (0.024 in.)
(A)
(e) Using a heat light, heat the vehicle body and moulding.
Heating temperature:
Body 40 - 60_C (104 - 140_F)
(B) (C)
Moulding 20 - 30_C (68 - 86_F)
B67635 NOTICE:
Do not heat the body and moulding excessively.
(f) Remove the peeling paper from the moulding face.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3487
76-14 EXTERIOR/INTERIOR TRIM - REAR DOOR WINDOW FRAME MOULDING
SUB-ASSY LH
HINT:
Be careful that dirt or foreign objects do not stick to the adhesive
part when removing the peeling paper.
(g) Engage the 2 claws and install the moulding with the
screw.
NOTICE:
Do not apply excessive force onto the moulding, but steady
pressure with your thumbs.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3488
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo