Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 40 20uvm x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
76-15
EXTERIOR/INTERIOR TRIM - REAR DOOR WINDOW FRAME MOULDING REAR LH
REAR DOOR WINDOW FRAME MOULDING REAR LH
760VL-01
REPLACEMENT
HINT:
On the RH side, use the same procedure as on the LH side.
1. REMOVE REAR DOOR WINDOW FRAME MOULDING
REAR LH
(a) Remove the screw.
(b) Using a heat light, heat the moulding between 40 - 60_C
Claw
(104 - 140_F).
NOTICE:
Do not heat the moulding excessively.
(c) Slide the moulding upward to remove the moulding.
B67636 NOTICE:
If reusing the moulding, take care not to damage the mould-
ing.
2. INSTALL REAR DOOR WINDOW FRAME MOULDING
(2) Tape REAR LH
(a) Using a shop rag, remove the tape from the moulding.
Caulking Sponge (b) Clean the contact surface of the vehicle body with a shop
rag saturated with white gasoline.
(c) Clean the outer circumference of the moulding with white
gasoline.
Double-sided Tape (d) Apply new double-sided tape to the moulding, as shown
(A) in the illustration.
Dimension:
(1) 175.0 mm (6.890 in.)
Length (A)
(C) (2) 43.0 mm (1.693 in.)
(B)
Width (B) 5.0 mm (0.197 in.)
(1) 1.6 mm (0.063 in.)
Thickness (C)
(1) Tape (2) 0.5 mm (0.020 in.)
(e) Using a heat light, heat the vehicle body and moulding.
Heating temperature:
Body 40 - 60_C (104 - 140_F)
Moulding 20 - 30_C (68 - 86_F)
B67637
NOTICE:
Do not heat the body and moulding excessively.
(f) Remove the peeling paper from the moulding.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3489
76-16
EXTERIOR/INTERIOR TRIM - REAR DOOR WINDOW FRAME MOULDING REAR LH
HINT:
Be careful that dirt or foreign objects do not stick to the adhesive
part when removing the peeling paper.
(g) Engage the 2 claws and install the moulding with the
screw.
NOTICE:
Do not apply excessive force onto the moulding, but steady
pressure with your thumbs.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3490
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo