Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 43 2054g onvein40

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download onvein40 documenatation <<

Text preview - extract from the document

                                                                                                         99-7
                                         MAINTENANCE   -   CHASSIS


CHASSIS
                                                                                                        9901Q-01


ON-VEHICLE INSPECTION
1.     INSPECT STEERING LINKAGE
(a)    Check the steering linkage for looseness or damage.
       Check that:
        S   Tie rod ends do not have excessive play.
        S   Dust seals and boots are not damaged.
        S   Boot clamps are not loose.
(b) Inspect the dust cover for damage.
2.     INSPECT STEERING GEAR HOUSING OIL
(a) Check the steering gear housing for oil leakage.
If leakage is found, check for cause and repair it.
3.     INSPECT DRIVE SHAFT BOOTS
(a) Inspect the drive shaft boots for clamp looseness, grease leakage or damage.
                                             4.     INSPECT BALL JOINTS AND DUST COVERS
                                             (a) Inspect the ball joints for excessive looseness.
                                                    (1) Jack up the front of the vehicle and place wooden
                                                          blocks with a height of 180 - 200 mm (7.09 - 7.87
                                                          in.) under the front tires.
                                                    (2) Lower the jack until there becomes about half a load
                                                          on the front coil spring. Place stands under the ve-
                                                          hicle for safety.
                                      D30727        (3) Check that the front wheels are pointing straight
                                                          ahead and block them with chocks.
                                                    (4) Using a lever, pry up the end of the lower arm and
                                                          check the amount of play.
                                                    Maximum ball joint vertical play:
                                                    0 mm (0 in.)
                                             If there is any play, replace the ball joint.
                                             (b) Check the dust cover for damage.




                                       D30728




5.    INSPECT TRANSAXLE FLUID (See page 40-2 )
6.    4WD:
      INSPECT TRANSFER OIL (See page 31-4 )
7.    4WD:
      INSPECT REAR DIFFERENTIAL OIL (See page 29-6 )
8.    4WD:
      TIGHTEN BOLTS FOR PROPELLER SHAFT (See page 30-6 )
9.    ROTATE TIRES (See page 28-2 )

 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                Author :            Date :              3526

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo