Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ch1grfe gene repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

                                                                                         CH-11
                   CHARGING (1GR-FE)     -   GENERATOR
                                                                                         CH0NA-01


                                 REPLACEMENT
                                 1.    INSPECT GENERATOR ROTOR BEARING
                                 (a) Check the bearing is not rough or worn.
                                 If necessary, replace the bearing.




                        B17643



                                 2.   REMOVE GENERATOR ROTOR BEARING
      SST
                 Turn                 SST 09820-00021
                                 NOTICE:
 Hold                            Be careful not to damage the fan.
                                 (a) Remove the bearing cover (Inside).




                        B17644



                                 3.    INSTALL GENERATOR ROTOR BEARING
SST
                                 (a)   Place the rotor on the pulley.
                                 (b)   Install the bearing cover (Inside).
                                 (c)   Using SST and a press, press in a new bearing.
                                       SST 09820-00031



        Pulley          B17645



                                 (d)   Using SST, push in the bearing cover (outside).
      SST                              SST 09285-76010




                        B17646



                                 4.    INSPECT GENERATOR DRIVE END FRAME BEARING
                                 (a) Check the bearing is not rough or worn.
                                 If necessary, replace the bearing.




                        B17647
CH-12
                CHARGING (1GR-FE)   -   GENERATOR

                           5.    REMOVE GENERATOR DRIVE END FRAME BEARING
                           (a)   Remove the 4 screws and retainer plate.




                  B17648



                           (b)   Using SST, tap out the bearing.
                                 SST 09950-60010 (09951-00250), 09950-70010
                                        (09951-07100)

        SST




                  B17649



                           6.    INSTALL GENERATOR DRIVE END FRAME BEARING
                           (a)   Using SST and a press, press in a new bearing.
                                 SST 09950-60010 (09951-00470), 09950-70010
          SST                             (09951-07100)
                           (b)   Install the retainer plate with the 4 screws.
                                 Torque: 2.6 Nm (27 kgfcm, 23 in.lbf)



                  B17650

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo