Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ac camc1grf inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

AC-58
        AIR CONDITIONING   -   COMPRESSOR AND MAGNETIC CLUTCH (1GR-FE)
                                                                             AC3SI-01


                   INSTALLATION
                   1.    INSTALL COMPRESSOR AND MAGNET CLUTCH
                   (a)   Install the compressor and the magnetic clutch with the 4
                         bolts.
                         Torque: 24 Nm (245 kgfcm, 18 ftlbf)
                   (b)   Connect the connector.


          I28955



                   2.    INSTALL SUCTION HOSE
                   (a)   Remove the attached vinyl tape from the hose.
                   (b)   Sufficiently apply compressor oil to a new O-ring and the
                         fitting surfaces of the compressor and magnetic clutch.
                         Compressor oil: ND-OIL 8 or equivalent
                   (c)   Install the O-ring on the suction hose sub-assy.
                   (d)   Install the suction hose sub-assy on the compressor and
                         magnetic clutch with the nut.
          I28954         Torque: 10 Nm (100 kgfcm, 7 in.lbf)

                   3.     INSTALL DISCHARGE HOSE
                   (a)    Remove the attached vinyl tape from the hose.
                   (b)    Sufficiently apply compressor oil to a new O-ring and the
                          fitting surfaces of the compressor and magnetic clutch.
                          Compressor oil: ND-OIL 8 or equivalent
                   (c) Install the O-ring on the discharge hose sub-assy.
                   (d) Install the discharge hose sub-assy on the compressor
                          and magnetic clutch with the nut.
          I28953          Torque: 10 Nm (100 kgfcm, 7 in.lbf)
                   4.     INSTALL AND CHECK DRIVE BELT
                          (See page AC-19 and AC-17)
                   5.     INSTALL ENGINE UNDER COVER
                   6.     CONNECT NEGATIVE (-) TERMINAL CABLE TO BAT-
                          TERY
                   7.     EVACUATE AIR FROM REFRIGERATION SYSTEM
                   8.     CHARGE SYSTEM WITH REFRIGERANT
                          Specified amount:
                          Access cab, Standard cab:
                          600 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo