Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ac camc2uzf ovi

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download ovi documenatation <<

Text preview - extract from the document

                                                                        AC-59
    AIR CONDITIONING   -   COMPRESSOR AND MAGNETIC CLUTCH (2UZ-FE)


               COMPRESSOR AND MAGNETIC
               CLUTCH (2UZ-FE)                                           AC3SJ-01


               ON-VEHICLE INSPECTION
               1.     SET MANIFOLD GAUGE SET (See page AC-20)
               2.     START ENGINE
               3.     INSPECT COMPRESSOR FOR METALLIC SOUND
               Check if a metallic sound can be heard from the compressor
               when the A/C switch is on.
               If a metallic sound cannot be heard, replace the compressor as-
               sembly.
               4.     INSPECT REFRIGERANT PRESSURE
                      (See page AC-3)
               5.     STOP ENGINE
               6.     INSPECT VISUALLY FOR LEAKAGE OF REFRIGER-
                      ANT FROM SAFETY SEAL
               Using a gas leak detector, check for leakage of refrigerant.
               If there is any leakage, replace the compressor assembly.
               7.     REMOVE MANIFOLD GAUGE SET
                      (See page AC-22)
               8.     CHECK FOR LEAKAGE OF GREASE FROM CLUTCH
                      BEARING
               9.     CHECK FOR SIGNS OF OIL ON PRESSURE PLATE
               If necessary, repair or replace.
               10. INSPECT MAGNETIC CLUTCH BEARING FOR NOISE
               (a) Start the engine.
               (b) Check if abnormal noise is heard from near the compres-
                      sor when the A/C switch is OFF.
               If abnormal noise is being emitted, replace the magnetic clutch.

               11.   INSPECT MAGNETIC CLUTCH OPERATION
               (a)   Disconnect the connector.
      3        (b)   Connect the positive (+) lead from the battery to terminal
                     3 and the negative (-) lead to body ground.
               (c) Check that the magnetic clutch is energized.
               If operation is not as specified, replace the magnetic clutch.



      I11134



               12.    INSPECT COMPRESSOR LOCK SENSOR RESIS-
                      TANCE
               (a) Disconnect the connector.
      2        (b) Measure the resistance between terminals 1 and 2.
1                     Standard resistance:
                      65 to 125  at 20 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo