Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ac accacci insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
AC-92 AIR CONDITIONING - AIR CONDITIONING CONTROL ASSEMBLY (Center
Cluster Integration)
AC3S3-02
INSPECTION
1. Access cab, Standard cab:
INSPECT ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal B7 and
the negative (-) lead to terminal A8 then check that the illumina-
tions lights up.
If operation is not as specified, check the faulty bulb.
: Bulb
A8
B7
I11193
2. Double cab:
INSPECT ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal B2 and
the negative (-) lead to terminal B11 then check that the illu-
minations lights up.
If operation is not as specified, check the faulty bulb.
: Bulb
B2
B11
I27863
3. INSPECT BULB
Set the tester as shown in the illustration to check for continuity.
If continuity exists, replace the heater control.
If no continuity exists, replace the bulb.
I07872
AIR CONDITIONING - AIR CONDITIONING CONTROL ASSEMBLY (Center AC-93
Cluster Integration)
4. Access cab, Standard cab:
INSPECT A/C SWITCH CONTINUITY
Standard:
OFF ON Switch condition Tester connection Specified condition
OFF A12 - A9 No continuity
ON A12 - A9 Continuity
If operation is not as specified, replace the integration circuit
bulb.
A1
A9
A12
I11194
5. Double cab:
INSPECT A/C SWITCH CONTINUITY
Standard:
Switch condition Tester connection Specified condition
OFF ON OFF A17 - A18 No continuity
ON A17 - A18 Continuity
If operation is not as specified, replace the integration circuit
bulb.
A17
A18
I27864
6. Access cab, Standard cab:
Connector "A" A1
INSPECT A/C INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A12 and the negative (-) lead to terminal A1.
(b) Push the A/C button in and check that the A/C indicator
lights up.
A12
If operation is not as specified, replace the integration circuit.
I12235
AC-94 AIR CONDITIONING - AIR CONDITIONING CONTROL ASSEMBLY (Center
Cluster Integration)
(c) Connect the positive (+) lead from the battery to terminal
A11 Connector "A" A1
A11 and the negative (-) lead to terminal A10, then check
that the indicator dims.
If operation is not as specified, replace the integration circuit.
A10
A12
I12236
Connector "A" 7. Double cab:
INSPECT A/C INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A17 and the negative (-) lead to terminal A10.
(b) Push the A/C button in and check that the A/C indicator
A17 A10 lights up.
If operation is not as specified, replace the integration circuit.
I27865
8. Access cab, Standard cab:
INSPECT AIR INLET CONTROL SWITCH CONTINUITY
Switch condition Tester connection Specified condition
OFF ON
OFF B13 - A1 No continuity
ON B13 - A1 Continuity
Illumination circuit A4 - B13 Continuity
If operation is not as specified, replace the integration circuit
bulb
A1
B13
A4
I11195
AIR CONDITIONING - AIR CONDITIONING CONTROL ASSEMBLY (Center AC-95
Cluster Integration)
9. Double cab:
INSPECT AIR INLET CONTROL SWITCH CONTINUITY
Switch condition Tester connection Specified condition
OFF B8 - A10 No continuity
OFF ON ON B8 - A10 Continuity
Illumination circuit A14 - B8 Continuity
If operation is not as specified, replace the integration circuit
bulb
A10 B8
A14
I27866
10. Access cab, Standard cab:
A4 Connector "A" A1
INSPECT AIR INLET INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A4 and the negative (-) lead to terminal A1.
(b) Push the air inlet button in and check that the air inlet indi-
cator lights up.
If operation is not as specified, replace the integration circuit.
I12237
(c) Connect the positive (+) lead from the battery to terminal
A4 Connector "A" A1
A11 and the negative (-) lead to terminal A10, then check
that the indicator dims.
If operation is not as specified, replace the integration circuit.
A11 A10
I12238
Connector "A" 11. Double cab:
INSPECT AIR INLET INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A14 and the negative (-) lead to A10.
(b) Push the air inlet button in and check that the air inlet indi-
A14 A10 cator lights up.
If operation is not as specified, replace the integration circuit.
I27867
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo