Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ac acsy char
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download char documenatation <<
Text preview - extract from the document
AC-11
AIR CONDITIONING - AIR CONDITIONING SYSTEM
AC22G-08
CHARGING
1. INSTALL CHARGING CYLINDER
HINT:
When handling the charging cylinder, always follow the direc-
Push
Air tions given in the instruction manual.
(a) Charge the proper amount of refrigerant into the charging
cylinder.
(b) Connect the center hose to the charging cylinder.
Low Pressure CAUTION:
Service Valve
Do not open either the high or low side valve of the manifold
gauge set.
(c) Open the valve of the charging cylinder.
(d) Press the valve core on the side of the manifold gauge
and expel the air from the center hose.
High Pressure
Service Valve
Charging Cylinder
N13793
2. INSPECT REFRIGERATION SYSTEM FOR LEAKS
(a) Open the high pressure side valve and charge refrigerant.
(b) When the low pressure gauge indicates 98 kPa
(1 kgf/cm2, 14 psi), close the high pressure side valve.
(c) Using a gas leak detector, check the system for leakage.
CAUTION:
Use a refrigerant recovery/recycling machine to recover
the refrigerant whenever replacing parts.
Gas Leak
Detector
N13792
AC-12
AIR CONDITIONING - AIR CONDITIONING SYSTEM
3. CHARGE REFRIGERANT INTO REFRIGERANT SYS-
TEM
If there is no leak after refrigerant leak check, charge the proper
amount of refrigerant into the refrigeration system.
CAUTION:
S Never run the engine when charging the system
through the high pressure side.
S Do not open the low pressure side valve when the
system is being charged with liquid refrigerant.
Low Pressure
(a) Open the high pressure side valve fully.
Service Valve (b) Charge specified amount of refrigerant, then close the
high pressure side valve.
HINT:
The system is fully charged if bubbles cannot be seen through
the sight glass.
(c) Partially charge the refrigeration system with refrigerant.
High Pressure (1) Prepare the vehicle:
Service Valve
S Running engine at 1,500 rpm
N13790 S Single A/C:
Front blower speed control dial at "HI" posi-
tion
S Dual A/C:
Front and rear blower speed set at "HI" posi-
tion
S Single A/C:
Front temperature control dial at "MAX.
COOL" position
S Dual A/C:
Front temperature control dial at "MAX.
COOL" position
Rear temperature control set at 18.5◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo