Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ac hca inst
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<
Text preview - extract from the document
AC-105
AIR CONDITIONING - HEATER CONTROL ASSEMBLY
AC27P-03
INSTALLATION
1. INSTALL HEATER CONTROL ASSEMBLY
(a) Connect the connectors.
(b) Pass the heater control as shown in the illustration.
Water Valve Control
Cable
Air Mix Control Cable
Mode Control Cable
I11159
(c) When using the removed one:
Install the heater control assembly.
I12239
(d) When using a new one:
Install the heater control assembly.
I11161
AC-106
AIR CONDITIONING - HEATER CONTROL ASSEMBLY
2. ADJUST HEATER CONTROL CABLES
(a) Set the mode control dial at the "FACE" position.
(b) Set the temperature control dial at the "MAX. COOL" posi-
tion.
(c) Adjust the mode control cable.
Pull the air inlet control link to the "FACE" position, con-
nect the control cable and lock the clamp.
HINT:
To "FACE" Lock the clamp while lightly pushing the outer cable in the direc-
tion shown by the arrow in the illustration.
I28081
(d) Adjust the air mix control cable.
To "COOL" Pull the air inlet control link to the "COOL" position, con-
nect the control cable and lock the clamp.
HINT:
Lock the clamp while lightly pulling the outer cable in the direc-
tion shown by the arrow in the illustration.
I11169
(e) Adjust the water valve control cable.
Pull the air inlet control link to the "COOL" position, con-
nect the control cable and lock the clamp.
HINT:
Lock the clamp while lightly pulling the outer cable in the direc-
To "COOL" tion, shown by the arrow in the illustration.
I11170
3. INSTALL HEATER TO REGISTER DUCT NO. 4
4. INSTALL LOWER NO. 2 FINISH PANEL
5. INSTALL GLOVE COMPARTMENT PANEL
6. INSTALL HEATER TO REGISTER DUCT NO. 2
7. INSTALL LOWER LH FINISH PANEL
(See page BO-120)
AC-107
AIR CONDITIONING - HEATER CONTROL ASSEMBLY
8. INSTALL CENTER CLUSTER INTEGRATION PANEL
(a) When replacing the heater control assembly:
Pull off the cover.
(b) Install the center cluster integration panel, then connect
the 2 connectors.
(c) Install the 5 screws.
(d) Install the 3 heater control knobs.
7 Clips
H11175
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo