Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ac presw ovi

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download ovi documenatation <<

Text preview - extract from the document

                                                                                                       AC-79
                                    AIR CONDITIONING    -   PRESSURE SWITCH


                                                PRESSURE SWITCH                                         AC0E7-05

                         2             1        ON-VEHICLE INSPECTION
                                                1.    SET MANIFOLD GAUGE SET (See page AC-20)
                                                2.    DISCONNECT CONNECTOR
                                                3.    RUN ENGINE AT APPROX. 2,000 rpm
                                                4.    SET BLOWER SPEED CONTROL SWITCH TO "HI"
                                                      POSITION
                                       I11146
                                                5.    SET TEMPERATURE CONTROL LEVER TO "MAX.
                                                      COOL" POSITION
                                                6.    A/C SWITCH ON
   Low pressure       High pressure             7.    INSPECT PRESSURE SWITCH OPERATION
   side               side
                                                (a) Connect the positive (+) lead from the ohmmeter to termi-
            ON (Continuity)
                                                      nal 1 and the negative (-) lead to terminal 2.
                                                (b) Check continuity between terminals when refrigerant
                                                      pressure is changed, as shown in the illustration.
          196 kpa        3,140 kpa              If operation is not as specified, replace the pressure switch.
(2.0 kgf/cm2, 28psi) (32.0 kgf/cm2, 455psi)
OFF (No Continuity) OFF (No Continuity)
                                      Z13470

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo