Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ata750ea atu1grfe inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

                                                                                          AT-31
   AUTOMATIC TRANSMISSION (A750E, A750F)   -   AUTOMATIC TRANSMISSION UNIT (1GR-FE)
                                                                                           AT13Z-01


                                  INSTALLATION
                                  1.    CHECK TORQUE CONVERTER INSTALLATION
                                  (a)   Install the torque converter to the transmission housing.




                                  (b)   Using vernier calipers and a straight edge, measure di-
                                        mension A between the transmission fitting part and the
                                        converter fitting part of the drive plate.




                 A

                         D14129



                                  (c)   Using vernier calipers and a straight edge, measure di-
                                        mension B shown in the illustration and check that B is
                                        greater than A measured in step (b).
                                        Standard distance: A + 1 mm (0.04 in.) or more
                                  2.    MEASURE DRIVE PLATE RUNOUT AND INSPECT
                                        RING GEAR (See page AT-39)
                                  3.    TRANSMISSION INSTALLATION
                                  (a)   Installation is in the reverse order of removal
Dimension B              D14130         (See page AT-27).
                                  (b)   Adjust the shift lever position (See page DI-952).
                                  (c)   Fill the transmission (See page AT-4).
                                  (d)   Conduct the road test of the vehicle (See page DI-953).

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo