Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra ata750ea tccadp insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
insp


>> Download insp documenatation <<

Text preview - extract from the document
                                                                                                        AT-39
            AUTOMATIC TRANSMISSION (A750E, A750F)   -   TORQUE CONVERTER CLUTCH AND DRIVE PLATE



   SST
                                           TORQUE CONVERTER CLUTCH
                                           AND DRIVE PLATE                                               AT143-01


                                           INSPECTION
                                           1.    INSPECT ONE-WAY CLUTCH
                                           (a)   Install SST so that it fits in the notch of the converter hub
                                                 and outer race of the one-way clutch.
                                                 SST 09350-30020 (09351-32020)
                                  AT5436



                                           (b)   Press on the serrations of the stator with a finger and ro-
          Free
                                                 tate it.
                 Turn                      (c) Check if it rotates smoothly when turned clockwise and
   Lock                                          locks when turned counterclockwise.
                                           If necessary, clean the converter clutch and retest the one-way
                                           clutch.
Hold                                       Replace the converter clutch if the clutch still fails the test.

                                  AT5437



                                           2.     MEASURE DRIVE PLATE RUNOUT AND INSPECT
                                                  RING GEAR
                                           (a) Set up a dial indicator and measure the drive plate runout.
                                                  Maximum runout: 0.20 mm (0.0079 in.)
                                           (b) Check for damage to the ring gear.
                                           If runout is not within the specification or if the ring gear is dam-
                                           aged, replace the drive plate. If installing a new drive plate, note
                                           the orientation of the spacers and tighten the bolts (See page
                                  Q04237   EM-108, EM-83 or EM-95).



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo