Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo bwg inst
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<
Text preview - extract from the document
BO-90
BODY - BACK WINDOW GLASS
BO4Q6-01
INSTALLATION
1. Fix type, Slide type, Power slide type:
CLEAN AND SHAPE CONTACT SURFACE OF BODY
Adhesive
(a) Using a knife, cut away any rough adhesive on the con-
tact surface of the body to shape the surface.
HINT:
Leave as much of the adhesive on the body as possible.
(b) Clean the contact surface of the body with a piece of shop
BO4420
rag saturated with cleaner.
2. Fix type, Slide type, Power slide type:
POSITION GLASS
(a) Place the glass in the correct position.
(b) Check that the whole contact surface of the glass rim is
perfectly even.
(c) Place reference marks on the glass and body.
(d) Remove the glass.
H11354
3. Fix type, Slide type, Power slide type:
Primer M
COAT CONTACT SURFACE OF BODY WITH PRIMER
M
Using a brush, coat the exposed part of the body with Primer
M.
NOTICE:
Primer M S Allow the primer coating to dry for 3 minutes or more.
S Do not apply too much Primer M.
Adhesive H02865 S Throw away any leftover Primer M.
BO-91
BODY - BACK WINDOW GLASS
4. Fixed type:
COAT CONTACT SURFACE OF GLASS WITH PRIMER
a b G
a b Using a brush or sponge, coat the edge of the glass and the
c contact surface with Primer G as shown in the illustration.
d c
HINT:
d If the area other than that specified is coated by accident, wipe
a-a b-b off the primer with a clean shop rag before it dries.
NOTICE:
S Allow the primer coating for 3 minutes or more.
S Throw away leftover Primer G.
c-c d-d
Primer G
H11356
5. Slide type, Power slide type:
COAT CONTACT SURFACE OF GLASS WITH PRIMER
a b
G
a
b c Using a brush or sponge, coat the edge of the glass and the
d c contact surface with Primer G as shown in the illustration.
d HINT:
a-a b-b If the area other than that specified is coated by accident, wipe
off the primer with a clean shop rag before it dries.
NOTICE:
S Allow the primer coating for 3 minutes or more.
S Throw away leftover Primer G.
c-c d-d
Primer G
H11357
BO-92
BODY - BACK WINDOW GLASS
6. Fixed type:
APPLY ADHESIVE
a b (a) Cut off the tip of the cartridge nozzle.
a Adhesive: Part No. 08850-00801 or equivalent
b c
c HINT:
d
After cutting off the tip, use all adhesive within the time de-
d
B b-b scribed in the table below.
a-a B Usage timeframe:
A
Temperature Usage Timeframe
A
35◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo