Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo frodoo disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
disa

>> Download disa documenatation <<

Text preview - extract from the document

BO-11
BODY - FRONT DOOR
BO0I3-05

DISASSEMBLY
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page SS-2).
1. w/o Power window:
REMOVE REGULATOR HANDLE
Pull off the snap ring with a cloth and remove the regulator han-
dle and plate.
BO0020

2. REMOVE INSIDE HANDLE BEZEL
(a) Remove the screw.
(b) Using a screwdriver, remove the inside handle bezel as
shown in the illustration.
HINT:
Tape the screwdriver tip before use.

H09440

3. w/ Power window:
REMOVE POWER WINDOW SWITCH
(a) Using a screwdriver, remove the power window switch.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connectors.
4. w/ Courtesy light:
: Clip REMOVE COURTESY LIGHT
H09441 (a) Using a screwdriver, remove the courtesy light.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connector.
5. w/o Courtesy light:
REMOVE COURTESY LIGHT COVER
Using a screwdriver, remove the courtesy light cover.
HINT:
Tape the screwdriver tip before use.
6. w/ Tweeter speaker:
REMOVE TWEETER SPEAKER
(a) Using a screwdriver, remove the tweeter speaker cover.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connector.
(c) Remove the 3 screws and tweeter speaker.
BO-12
BODY - FRONT DOOR

7. REMOVE DOOR TRIM
(a) Remove the 2 caps and 2 screws.
(b) Insert a screwdriver between the door trim and door panel
to remove the door trim.
HINT:
Tape the screwdriver tip before use.
w/ Power Window, w/o Courtesy Light w/ Power Window, w/ Courtesy Light

9 Clips 9 Clips

w/o Power Window, w/o Courtesy Light w/o Power Window, w/ Courtesy Light

9 Clips 9 Clips

H09442

(c) Pull the door trim upward to remove it.
8. REMOVE DOOR ASSIST GRIP
Remove the 2 screws and door assist grip from the door trim.
9. REMOVE INNER WEATHERSTRIP
10. REMOVE LOWER WEATHERSTRIP
11. REMOVE INSIDE HANDLE
(a) Remove the screw.
(b) Slide the inside handle backward to remove it.

(c) Disconnect the 2 cables from the inside handle as shown
in the illustration.
2
12. REMOVE SERVICE HOLE COVER
(a) Disconnect the clamps and connector.
1 (b) Remove the service hole cover.
13. REMOVE SPEAKER
2
(a) Disconnect the connector.
1 (b) Remove the 3 screws and speaker.
H06127 14. REMOVE OUTSIDE REAR VIEW MIRROR
(a) w/ Remote control:
Disconnect the connector.
(b) Remove the 3 screws and outside rear view mirror.
BO-13
BODY - FRONT DOOR

15. REMOVE DOOR BELT MOULDING
Using a moulding remover, remove the door belt moulding.
16. REMOVE DOOR GLASS RUN

: 10 Clips
H23538

17. REMOVE FRONT LOWER FRAME
Remove the 2 bolts, nut and front lower frame as shown in the
illustration.

H09444

18. REMOVE REAR LOWER FRAME
Remove the bolt, nut and rear lower frame as shown in the il-
lustration.

H09445

19. REMOVE DOOR GLASS
(a) Open the door glass until the bolts appear in the service
hole.
(b) Remove the 2 bolts and door glass.
NOTICE:
Do not damage the door glass.

H09446
BO-14
BODY - FRONT DOOR

20. REMOVE WINDOW REGULATOR
w/ Power Window
(a) w/ Power window:
Disconnect the connector.
(b) w/ Power window:
Remove the 5 bolts, nut and window regulator.
(c) w/o Power window:
Remove the 4 bolts, nut and window regulator.
(d) Remove the window regulator through the service hole.

w/o Power Window

H09447

21. REMOVE DOOR LOCK
w/ Power Door Lock
(a) Disconnect the 2 links from the outside handle and door
lock cylinder.
(b) w/ Power door lock:
Disconnect the connector and remove the bolt.
(c) Using a torx

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo