Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo frose disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
disa


>> Download disa documenatation <<

Text preview - extract from the document
BO-156
                                       BODY   -   FRONT SEAT (Separate Type: Manual Adjuster)
                                                                                                BO4SD-01


                                     DISASSEMBLY
                                     CAUTION:
                                     Wear safety gloves, because the sharp edges and surfaces
                                     of the seat frame may cause injury to the hands.
                                     HINT:
                                      S    The procedures listed below are for the LH side.
                                      S    Tape the screwdriver tip before using it to remove the
                                           parts.
                                     1.    REMOVE HEADREST

                                     2.    REMOVE SEAT CUSHION OUTER SHIELD
                                     (a)   Remove the screw from the seat cushion outer shield.
                                     (b)   Using a screwdriver, remove the seat cushion outer
                                           shield.
                                     HINT:
                                     Tape the screwdriver tip before use.
                                     3.    REMOVE RECLINING ADJUSTER RELEASE HANDLE

     Claws   Clip
                            H24331



                                     4.    REMOVE VERTICAL ADJUSTER HANDLE
                                     (a)   Using a screwdriver, remove the vertical adjuster handle
                                           cap.
                                     HINT:
                                     Tape the screwdriver tip before use.




                            H24332



                                     (b)   Remove the 2 screws and the vertical adjuster handle.




                            H24333



                                     5.    REMOVE SEAT CUSHION INNER SHIELD
                                     (a)   Remove the screw from the seat cushion inner shield.
                                     (b)   Using a screwdriver, remove the seat cushion inner
                                           shield.
                                     HINT:
                                     Tape the screwdriver tip before use.
                                     6.    REMOVE FRONT SEAT INNER BELT
                                     (a) Disconnect the wire harness clamps and connectors.
             Claws   Clip   H24334   (b) Remove the nut and front seat inner belt.
                                                                                BO-157
                       BODY   -   FRONT SEAT (Separate Type: Manual Adjuster)

                     7.    REMOVE ARMREST ASSEMBLY
                     (a)   Using a screwdriver, remove the armrest cap.
                     (b)   Remove the bolt, armrest spacer, armrest lock plate and
                           armrest assembly.
                     (c)   Remove the spacer from the armrest assembly.




            H24316



                     8.    REMOVE SEATBACK COVER AND PAD
                     (a)   Remove the hog rings from the seat frame assembly.
                     (b)   Open the fastener.




            H24337



                     (c)   w/ Side airbag:
                           Remove the nut and disconnect the seatback cover
                           bracket from the seat frame assembly.




            H24861



                     (d)   Remove the hog rings shown in the illustration from the
                           seat frame assembly.




 Hog Ring   H24338



                     (e)   Remove the hog rings shown in the illustration from the
                           seat frame assembly.
                     (f)   Remove the seatback cover and pad from the seat frame
                           assembly.




Hog Ring    H24339
BO-158
                    BODY   -   FRONT SEAT (Separate Type: Manual Adjuster)

                  9.    REMOVE SEATBACK COVER
                  (a)   Turn up the seatback cover and remove the hog rings.
                  (b)   Remove the 2 headrest supports.
                  (c)   Remove the seatback cover from the seatback pad.




         H24319



                  10.   REMOVE SEAT CUSHION COVER AND PAD
                  (a)   Remove the clip.
                  (b)   Perform the same procedure on the other side.




         H24335



                  (c)   Remove the hog rings from the seat cushion cover.
                  (d)   Unlatch the seat cushion cover hooks, then remove the
                        seat cushion cover with seat cushion pad.




         H24336



                  11. REMOVE SEAT CUSHION COVER
                  Remove the hog rings and seat cushion cover from the seat
                  cushion pad.




         H24395



                  12.   REMOVE RH AND LH UPPER RECLINING ADJUSTER
                        INSIDE COVERS
                  (a)   Remove the screw and LH upper reclining adjuster inside
                        cover.
                  (b)   Perform the same procedure on the other side.




         H24342
                                                                   BO-159
          BODY   -   FRONT SEAT (Separate Type: Manual Adjuster)

         13.   REMOVE RH AND LH LOWER RECLINING ADJUSTER
               INSIDE COVERS
         (a)   Remove the screw and LH lower reclining adjuster inside
               cover.
         (b)   Perform the same procedure on the other side.




H24343



         14.   REMOVE RH AND LH SEAT CUSHION LOWER
               SHIELDS
         (a)   Using a screwdriver, disengage the claw and remove the
               LH seat cushion lower shield.
         HINT:
         Tape the screwdriver tip before use.
         (b) Perform the same procedure on the other side.
         15. Driver's seat:
H24341         REMOVE SEAT POSITION SENSOR
               (See page RS-118)



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo