Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo frose reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
reas

>> Download reas documenatation <<

Text preview - extract from the document

BO-160
BODY - FRONT SEAT (Separate Type: Manual Adjuster)
BO4SE-01

REASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
S The procedures listed below are for the LH side.
S A bolt without a torque specification is shown in the stan-
dard bolt chart (see page SS-2).
1. Driver's seat:
INSTALL SEAT POSITION SENSOR
(SEE PAGE RS-122)
2. INSTALL RH AND LH SEAT CUSHION LOWER
SHIELDS

3. INSTALL RH AND LH LOWER RECLINING ADJUSTER
INSIDE COVERS
(a) Install the LH lower reclining adjuster inside cover with the
screw.
(b) Perform the same procedure on the other side.

H24343

4. INSTALL RH AND LH UPPER RECLINING ADJUSTER
INSIDE COVERS
(a) Install the LH upper reclining adjuster inside cover with
the screw.
(b) Perform the same procedure on the other side.

H24342

5. INSTALL SEAT CUSHION COVER
Install the seat cushion cover to the seat cushion pad with the
hog rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
6. INSTALL SEAT CUSHION COVER AND PAD
(a) Install the seat cushion cover with seat cushion pad, and
H24395 latch the seat cushion cover hooks.
BO-161
BODY - FRONT SEAT (Separate Type: Manual Adjuster)

(b) Install the hog rings to the seat cushion cover.

H24336

(c) Install the clip.
(d) Perform the same procedure on the other side.
7. INSTALL SEATBACK COVER
(a) Install the seatback cover to the seatback pad.
(b) Install the 2 headrest supports.

H24335

(c) Turn up the seatback cover and install the hog rings.
8. INSTALL SEATBACK COVER AND PAD
(a) Install the seatback cover and pad to the seat frame as-
sembly.

H24319

(b) Install the hog rings to the seat frame assembly.

Hog Ring H24339

Hog Ring
H24338
BO-162
BODY - FRONT SEAT (Separate Type: Manual Adjuster)

(d) w/ Side airbag:
Connect the seatback cover bracket to the seat frame as-
sembly with the nut.
Torque: 5.5 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo