Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo froseabe disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                              BO-167
          BODY   -   FRONT SEAT (Bench Type)
                                                                BO4SS-03


         DISASSEMBLY
         CAUTION:
         Wear safety gloves, because the sharp edges and surfaces
         of the seat frame may cause injury to the hands.
         HINT:
         Tape the screwdriver tip before using it to remove the parts.
         1.    REMOVE OCCUPANT CLASSIFICATION ECU
               (See page RS-154)
         2.    REMOVE HEADRESTS
         3.    REMOVE SEAT HINGE COVER LH
         Remove the 2 screws and seat hinge cover LH.
         4.    REMOVE SEAT HINGE COVER RH
         Remove the 2 screws and seat hinge cover RH.




         5.  REMOVE SEATBACK ASSEMBLY
         Remove the 4 bolts and seatback assembly.




H24294



         6.    REMOVE CENTER ARMREST ASSEMBLY
         (a)   Remove the hog rings and turn the seatback cover over.




H24295



         (b)   Remove the 2 nuts and center armrest assembly from the
               seatback frame.
         7.    REMOVE SEATBACK FRAME
         (a)   Remove the 6 headrest supports from the seatback as-
               sembly.
         (b)   Remove the 2 screws and shoulder belt guide.



H24296
BO-168
                    BODY   -   FRONT SEAT (Bench Type)

                  (c)   Remove the hog rings from the seatback frame.
                  (d)   Remove the seatback frame from the seatback pad and
                        cover.




         H24298



                  (e) Disconnect the clamp.
                  (f)   Loosen the adjusting nuts.
                  HINT:
                  When loosening the nuts, hold one and loosen the other.
                  (g) Perform the same procedure on the other side.
                  (h) Remove the reclining adjusting cables.




         H24308



                  8.  REMOVE SEATBACK COVER
                  Remove the hog rings and seatback cover.
                  9.  REMOVE SEAT POSITION SENSOR (For Driver Seat)
                      (See page RS-118)
                  10. REMOVE SEAT POSITION SENSOR
                      (For Front Passenger Seat) (See page RS-145)



         H24297



                  11.   REMOVE 2 SEAT TRACK LOWER REAR BRACKETS
                  (a)   Remove the 2 nuts and seat track lower rear bracket.
                  (b)   Perform the same procedure on the other side.




         H24299
                                                               BO-169
           BODY   -   FRONT SEAT (Bench Type)

         12.   REMOVE LH OUTER TRACK ASSEMBLY
         (a)   Slide the LH outer track assembly until the torx

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo