Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo frosease reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
reas

>> Download reas documenatation <<

Text preview - extract from the document

BO-147
BODY - FRONT SEAT (Separate Type: Power Adjuster)
BO4SA-02

REASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page SS-2).
1. INSTALL SEAT POSITION SENSOR
(SEE PAGE RS-122)
2. INSTALL VERTICAL ADJUSTER BRACKET INNER
AND OUTER COVERS
(a) Install the vertical adjuster bracket inner cover with the
screw.
(b) Perform the same procedure on the other side.

3. INSTALL RH AND LH SEATBACK SHIELDS
(a) Install the RH seatback shield with the 2 screws.
(b) Perform the same procedure on the other side.

H24327

4. INSTALL RH AND LH RECLINING ADJUSTER INSIDE
COVERS
(a) Connect the wire harness clamp.
(b) Install the RH reclining adjuster inside cover with the
screw.
(c) Perform the same procedure on the other side.

H24326

5. INSTALL LUMBAR SUPPORT ADJUSTER
(a) Install a new bushing to the lumbar support adjuster.
(b) Install the lumbar support adjuster with the 2 screws.

H24325
BO-148
BODY - FRONT SEAT (Separate Type: Power Adjuster)

(c) Engage the seatback spring edge with the seat frame as-
sembly.
6. w/ Seat heater:
INSTALL SEAT CUSHION HEATER ASSEMBLY
(a) Set the seat cushion heater assembly with the name
stamp side facing the seat cushion cover.
(b) Install the seat cushion heater assembly with the 10 tack
pins.
H24324 NOTICE:
Do not substitute other metal parts for tack pins.

Front
a-a:
Listing Pocket Seat Heater
Tack Pin
Tack Pin
Seat Heater b b b b
Tack Pin
Seat Wire A

b b a a b b
Seat Cushion Cover
A: Install the tack pins under the wire.
b b a a b b

b-b:
Tack Pin
Seat Heater
Seat Heater Strap

b b b b

Seat Cushion Cover
Name Stamp
Tack pins should not be beyond the seat.

H24394

7. INSTALL SEAT CUSHION COVER
Install the seat cushion cover to the seat cushion pad with the
hog rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
8. INSTALL SEAT CUSHION COVER AND PAD
(a) Install the seat cushion cover with seat cushion pad, and
H24395 latch the seat cushion cover hooks.
BO-149
BODY - FRONT SEAT (Separate Type: Power Adjuster)

(b) Install the hog rings to the seat cushion cover.

H24378

(c) Install the 2 clips.
(d) Connect the wire harness clamp.
9. w/ Seat heater:
INSTALL SEATBACK HEATER ASSEMBLY
(a) Set the seatback heater assembly with the name stamp
side facing the seatback cover.
(b) Install the seatback heater assembly with the 11 tack
pins.
H24320 NOTICE:
Do not substitute other metal parts for tack pins.

Upper
a-a:
Listing Pocket Seat Heater
a a
Tack Pin
Tack Pin
Seat Heater
Tack Pin a a
b b b b
Seat Wire A
b b b

Seatback Cover
b b b
A: Install the tack pins under the wire. b b b b

b-b:
Tack Pin
Seat Heater

b b b b

Seatback Cover
Name Stamp
Tack pins should not be beyond the seat.

H24393

10. INSTALL SEATBACK COVER
(a) Install the seatback cover to the seatback pad.
(b) Install the 2 headrest supports.
BO-150
BODY - FRONT SEAT (Separate Type: Power Adjuster)

(c) Turn up the seatback cover and install the hog rings.
11. INSTALL SEATBACK COVER AND PAD
(a) Install the seatback cover and pad to the seat frame as-
sembly.

H24319

(b) Install the hog rings to the seat frame assembly.

Hog Ring
H24318

Hog Ring
H24321

(d) w/ Side airbag:
Connect the seatback cover bracket to the seat frame as-
sembly with the nut.
Torque: 5.5 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo