Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo froseasp disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
disa

>> Download disa documenatation <<

Text preview - extract from the document

BO-178
BODY - FRONT SEAT (Split Type: Driver's Side)
BO4SU-01

DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
Tape the screwdriver tip before using it to remove the parts.
1. REMOVE HEADREST

2. REMOVE SEAT CUSHION OUTER SHIELD
(a) Remove the screw from the seat cushion outer shield.
(b) Using a screwdriver, remove the seat cushion outer
shield.
HINT:
Tape the screwdriver tip before use.
3. REMOVE RECLINING ADJUSTER RELEASE HANDLE

Claws Clip
H24331

4. REMOVE VERTICAL ADJUSTER HANDLE
(a) Using a screwdriver, remove the vertical adjuster handle
cap.
HINT:
Tape the screwdriver tip before use.

H24332

(b) Remove the 2 screws and the vertical adjuster handle.

H24333
BO-179
BODY - FRONT SEAT (Split Type: Driver's Side)

5. REMOVE SEAT CUSHION INNER SHIELD
(a) Remove the bolt and front seat inner belt.
(b) Remove the screw from the seat cushion inner shield.
(c) Disconnect the front seat inner belt wire harness clamp
from the seat cushion inner shield.
(d) Using a screwdriver, remove the seat cushion inner
shield.
HINT:
Wire Harness Tape the screwdriver tip before use.
(e) Disconnect the connectors and clamps, and remove the
front seat inner belt.

Claw
Clip H24806

6. REMOVE SEATBACK COVER AND PAD
(a) Remove the hog rings from the seat frame assembly.
(b) Open the fastener.

H24337

H24861

(d) Remove the hog rings shown in the illustration from the
seat frame assembly.

Hog Ring H24338
BO-180
BODY - FRONT SEAT (Split Type: Driver's Side)

(e) Remove the hog rings shown in the illustration from the
seat frame assembly.
(f) Remove the seatback cover and pad from the seat frame
assembly.

Hog Ring H24339

7. REMOVE SEATBACK COVER
(a) Turn up the seatback cover and remove the hog rings.
(b) Remove the 2 headrest supports.
(c) Remove the seatback cover from the seatback pad.

H24319

8. REMOVE SEAT CUSHION COVER AND PAD
(a) Remove the clip.
(b) Perform the same procedure on the other side.

H24335

(c) Remove the hog rings from the seat cushion cover.
(d) Unlatch the seat cushion cover hooks, then remove the
seat cushion cover with seat cushion pad.

H24336

9. REMOVE SEAT CUSHION COVER
Remove the hog rings and seat cushion cover from the seat
cushion pad.

H24395
BO-181
BODY - FRONT SEAT (Split Type: Driver's Side)

10. REMOVE RH AND LH UPPER RECLINING ADJUSTER
INSIDE COVERS
(a) Remove the screw and LH upper reclining adjuster inside
cover.
(b) Perform the same procedure on the other side.

H24342

11. REMOVE RH AND LH LOWER RECLINING ADJUSTER
INSIDE COVERS
(a) Remove the screw and LH lower reclining adjuster inside
cover.
(b) Perform the same procedure on the other side.

H24343

12. REMOVE RH AND LH SEAT CUSHION LOWER
SHIELDS
(a) Using a screwdriver, disengage the claw and remove the
LH seat cushion lower shield.
HINT:
Tape the screwdriver tip before use.
(b) Perform the same procedure on the other side.
13. REMOVE SEAT POSITION SENSOR
H24341 (See page RS-118)

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo