Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo sbp remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

BO-236
                                                     BODY   -   SEAT BELT PRETENSIONER


                                                SEAT BELT PRETENSIONER                                   BO4T3-02


                                                REMOVAL
                                                NOTICE:
                                                 S  If the wiring connector of the seat belt pretensioner is
                                                    disconnected with the ignition switch ON, diagnostic
                                                    trouble codes will be recorded.
                                                 S  Never use a seat belt pretensioner from another ve-
                                                    hicle. When replacing parts, replace them with new
                                                    parts.
                                Negative
                                                1.     DISCONNECT CABLE FROM NEGATIVE BATTERY
                                Battery                TERMINAL
                                Terminal        Disconnect the cable from the negative (-) battery terminal.
                                                NOTICE:
                                                If the cable is disconnected from the negative battery termi-
                                                nal, the preset AM and FM stations stored in memory are
                                                erased. Be sure to make note of them before disconnecting
                                                the cable.
                                       BO4111   CAUTION:
                                                Work must be started at least 90 seconds after the ignition
                                                switch is turned to the LOCK position and the cable is dis-
                                                connected from the negative (-) battery terminal.
                                                (The SRS is equipped with a back-up power source. If work
                                                is started within 90 seconds of disconnecting the cable
                                                from the negative (-) battery terminal, the SRS may deploy.)
                                                2.     Standard cab:
                                                       REMOVE FRONT SEAT OUTER BELT
                                                (a) Remove the 5 screws and front door scuff plate.


                                                (b)     Remove the front pillar garnish.
                                                        (1) Using a screwdriver, remove the caps.
                                                HINT:
                                                Tape the screwdriver tip before use.
                                                      (2) Using a torx

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo