Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo seabel insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

BO-234
                                BODY   -   SEAT BELT
                                                                                           BO4T2-01


                              INSPECTION
                              CAUTION:
                              Replace the seat belt assembly (outer belt, inner belt, bolts,
                              nuts or sill-bar) if it has been used in a severe impact. The
                              entire assembly should be replaced even if damage is not
                              obvious.
                              1.    Except manual type:
                                    CONDUCT RUNNING TEST (IN SAFE AREA)
                              (a) Fasten the front seat belts.

                              (b)   Drive the vehicle at 16 km/h (10 mph) and brake hard.
                                    Check that the belt locks and cannot be extended at this
                                    time.
                              HINT:
                              Conduct this test in a safe area. If the belt does not lock, remove
                              the belt mechanism assembly and conduct the following static
                              check. Also, whenever installing a new belt assembly, verify the
                              proper operation before installation.
                     BO0632   2.    Driver seat belt (ELR):
                                    STATIC TEST
                              (a) Make sure that the belt locks when pulled out quickly.
                              (b) Remove the locking retractor assembly.
                              (c) Tilt the retractor slowly.




                              (d)    Make sure that the belt can be pulled out at a tilt of 15 de-
         15

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo