Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo sliroo disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                             BO-101
          BODY   -   SLIDING ROOF
                                                                  BO4QA-02


         DISASSEMBLY
         1.    REMOVE NO. 3 SLIDING ROOF HOUSING SIDE
               MOUNTING BRACKETS
         2.    REMOVE SLIDING ROOF HOUSING REAR MOUNT-
               ING BRACKETS




         3.    REMOVE SLIDING ROOF SUNSHADE STOPPER
         (a)   Remove the screw and stopper.
         (b)   Perform the same procedure on the other side.
         4.    REMOVE SUNSHADE TRIM




N21523



         5.     REMOVE REAR ROOF DRIP CHANNEL
         Remove the 2 screws and rear roof drip channel as shown in
         the illustration.




H10166



         6.  REMOVE REAR FRAME
         Remove the 4 screws and rear frame.




N21424



         7.    REMOVE DRIVE CABLE
         (a)   Remove the screw and sliding roof panel stopper.
         (b)   Slide the drive cable rearward, then remove it.
         (c)   Perform the same procedure on the other side.




H10514
BO-102
                    BODY   -   SLIDING ROOF

                  HINT:
                  At the time of reassembly, please refer to the following items.
                   S    Adjust the drive cable to a closed and tilted down position.
                   S    Slide the cable forward or backward to align the 2 marks
                        as shown in the illustration.
                   S    Slide the cable to the forefront with your hand.
                  8.    REMOVE ROOF WIND DEFLECTOR PANEL

         H12171



                  9.    REMOVE GUIDE BLOCK
                  (a)   Remove the 2 screws and guide block.
                  (b)   Perform the same procedure on the other side.




         H10516



                  10. REMOVE SLIDING ROOF HOUSING
                  Remove the 6 screws and sliding roof housing.




         N21522



                  11. REMOVE CABLE GUIDE CASING
                  Remove the 2 screws and cable guide casing.




         H11049

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo