Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo rooheado remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                             BO-133
                       BODY   -   ROOF HEADLINING (Double Cab)
                                                                                BO4QH-03


                   REMOVAL
                   HINT:
                   S       A bolt without a torque specification is shown in the stan-
                           dard bolt chart (see page SS-2).
                   1.      REMOVE FRONT DOOR SCUFF PLATE LH
                   (a)     Remove the 4 screws.
                   (b)     Using a screwdriver, disengage the claw and remove the
                           scuff plate.
 Claw     H24383
                   HINT:
                   Tape the screwdriver tip before use.
                   2.    REMOVE FRONT DOOR SCUFF PLATE RH
                   HINT:
                   Use the same procedures described for the LH side.




2 Clips            3.    REMOVE COWL SIDE TRIM BOARD LH
                   (a) Remove the nut, 2 clips and cowl side trim board.
                   4.    REMOVE COWL SIDE TRIM BOARD RH
                   HINT:
                   Use the same procedures described for the LH side.
                   5.    REMOVE FRONT DOOR OPENING TRIM WEATH-
                         ERSTRIP LH
                   6.    REMOVE FRONT DOOR OPENING TRIM WEATH-
          H16716         ERSTRIP RH
                   7.    REMOVE FRONT PILLAR GARNISH LH
                   (a) Remove the assist grip.
                         (1) Using a screwdriver, remove the 2 assist grip plugs.
                   HINT:
                   Tape the screwdriver tip before use.
                         (2) Remove the 2 screws and assist grip.




Clip               (b) Remove the front pillar garnish.
                   (c) Use the same manner described above to the other side.
                   8.    REMOVE FRONT PILLAR GARNISH RH
                   HINT:
                   Use the same procedures described for the LH side.




          H16717
BO-134
                           BODY   -   ROOF HEADLINING (Double Cab)

    Clip                 9.    REMOVE REAR DOOR SCUFF PLATE LH
                         (a)   Remove the 3 screws.
                         (b)   Using a screwdriver, disengage the claw and remove the
                               scuff plate.
                         HINT:
                         Tape the screwdriver tip before use.
                         10. REMOVE REAR DOOR SCUFF PLATE RH
                         HINT:
                H16718   Use the same procedures described for the LH side.
                         11. REMOVE REAR DOOR OPENING TRIM WEATH-
                               ERSTRIP LH
                         12. REMOVE REAR DOOR OPENING TRIM WEATH-
                               ERSTRIP RH




                         13.   REMOVE LOWER CENTER PILLAR GARNISH LH
      4 Clips            (a)   Remove the front seat outer belt floor anchor.
                               Torque: 42 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo