Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo readoodo disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
disa


>> Download disa documenatation <<

Text preview - extract from the document
                                                                                 BO-31
                           BODY   -   REAR DOOR (Double Cab)
                                                                                  BO4PV-02


                          DISASSEMBLY
                          HINT:
                          A bolt without a torque specification is shown in the standard
                          bolt chart (see page SS-2).
                          1.    REMOVE DOOR INSIDE BEZEL
                          (a) Using a screwdriver, open the cover.
                          HINT:
                          Tape the screwdriver tip before use.


                          (b)   Remove the screw.
                          (c)   Using a screwdriver, remove the door inside bezel, as
                                shown in the illustration.
                          HINT:
                          Tape the screwdriver tip before use.
                          2.    REMOVE COURTESY LIGHT
                          3.    REMOVE REAR ARMREST BASE PANEL UPPER
                          (a) Remove the rear ash receptacle.
                 H04751



                          (b)   Using a screwdriver, remove the rear armrest base panel
                                upper together with the power window switch.
                          HINT:
                          Tape the screwdriver tip before use.
                          (c) Disconnect the connector.
                          (d) Remove the power window switch from the rear armrest
                                base panel upper.

          Clip
                 H16659




8 Clips                   4.    REMOVE REAR DOOR TRIM PANEL
                          (a) Using a screwdriver, remove the cap.
                          HINT:
                          Tape the screwdriver tip before use.
                          (b) Remove the screw and 2 clips.
                          (c) Insert a screwdriver between the rear door trim panel and
                                door panel to remove the rear door trim panel.
                          HINT:
                 H23257   Tape the screwdriver tip before use.
                          (d) Pull the rear door trim panel upward to remove the rear
                                door trim panel.
                          (e) Remove the rear door weatherstrip inner from the rear
                                door trim panel.
                          5.    REMOVE SPEAKER
                          (a) Disconnect the connector.
                          (b) Remove the 3 screws and speaker.
BO-32
                           BODY   -   REAR DOOR (Double Cab)

                         6.    REMOVE REAR DOOR INSIDE HANDLE
                         (a)   Slide the rear door inside handle backward to remove it.




                H23534



                         (b) Disconnect the 2 cables from the rear door inside handle,
                              as shown in the illustration.
        2                7.   REMOVE REAR DOOR SERVICE HOLE COVER
                         (a) Using a clip remover, remove the clamp and grommets.
            1            (b) Remove the rear door service hole cover.
        2                NOTICE:
                         Do not tear the rear door service hole cover.
            1            8.   REMOVE REAR DOOR GLASS
                H06127   (a) Open the rear door glass until the bolts appear in the ser-
                              vice hole.
                         (b) Remove the 2 bolts.
                         NOTICE:
                         Do not damage the door glass.
                         (c) Pull the rear door glass upward to remove it.
                         9.   REMOVE REAR DOOR GLASS RUN




                         10.   REMOVE REAR DOOR WINDOW FRAME MOULDING
                               UPPER
                         (a)   Remove the 7 screws.
                         (b)   Using a screwdriver or clip remover, remove the rear door
                               window frame moulding upper.
                         HINT:
                         Tape the screwdriver tip before use.




                H23258
                                                                                                  BO-33
                                          BODY   -   REAR DOOR (Double Cab)

                                         11.   REMOVE REAR DOOR BELT MOULDING
                                         (a)   Apply protective tape to the outer surface, as shown in the
                                               illustration, to prevent the vehicle surface from being
                                               scratched.
                                         (b)   Using a moulding remover, remove the rear door belt
                                               moulding.


      : 4 Clips                 H23259



                                         12.   REMOVE REAR DOOR WINDOW FRAME REAR LOW-
                                               ER
                                         Remove the bolt, nut and rear door window frame rear lower,
                                         as shown in the illustration.
                                         HINT:
                                         Remove the rear door window frame rear lower through the ser-
                                         vice hole.

                                H23266



                                         13.   REMOVE REAR DOOR POWER WINDOW REGULA-
                          (c)                  TOR
                                         (a)   Disconnect the connector.
                                         (b)   Remove the 5 bolts.
                                         (c)   Loosen the bolt, and remove the rear door power window
                    (b)
                                               regulator.
            (b)           (b)
(b)               (b)                    HINT:
                                         Remove the rear door power window regulator through the ser-
                                H23537   vice hole.
                                         (d) Remove the 3 screws and power window regulator motor
                                               from the rear door power window regulator.
                                         14. REMOVE REAR DOOR LOCK
                                         (a) Disconnect the 2 control cables from the clamp.
                                         (b) Remove the clamp.
                                         (c) Disconnect the connector.




                                         (d)   Using a torx



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo