Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra bo reaseabe disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

BO-204
                    BODY   -   REAR SEAT (Bench Type)
                                                                         BO2G0-03


                  DISASSEMBLY
                  CAUTION:
                  Wear safety gloves, because the sharp edges and surfaces
                  of the seat frame may cause injury to the hands.
                  HINT:
                  Tape the screwdriver tip before using it to remove the parts.
                  1.    REMOVE HEADRESTS



                  2.    REMOVE REAR SEAT LOCK HANDLE
                  (a) Using a screwdriver, remove the rear seat lock handle.
                  HINT:
                  Tape the screwdriver tip before use.
                  (b) Perform the same procedure on the other side.




         H11236



                  3.    REMOVE REAR SEAT LOCK COVER
                  (a)   Remove the screw and rear seat lock cover.
                  (b)   Perform the same procedure on the other side.




         H11237



                  4.    REMOVE REAR SEAT CUSHION COVER
                  (a)   Remove the screw and rear seat cushion cover.
                  (b)   Perform the same procedure on the other side.




         H11238



                  5.    REMOVE SEAT CUSHION ASSEMBLY
                  (a)   Remove the 2 bolts.
                  (b)   Remove the seat cushion assembly front the seat cush-
                        ion hinge plate.
                  (c)   Perform the same procedure on the other side.




         H11239
                                                                    BO-205
               BODY   -   REAR SEAT (Bench Type)

              6.    REMOVE LH SEAT CUSHION HINGE COVER
              Using a screwdriver, remove the LH seat cushion hinge cover.
              HINT:
              Tape the screwdriver tip before use.




     H11240



              7.    REMOVE RH SEAT CUSHION HINGE UPPER AND
                    LOWER COVERS
              Using a screwdriver, remove the RH seat cushion hinge upper
              and lower covers.
              HINT:
              Tape the screwdriver tip before use.



     H11241



              8.    REMOVE SEAT CUSHION COVER
Hog Ring
              (a)   Open the fastener.
              (b)   Remove the hog rings and seat cushion cover.
              (c)   Perform the same procedure on the other side.




     H11242



              9.   REMOVE SEAT CUSHION SIDE COVER
              Remove the screw and seat cushion side cover.
              10. REMOVE SEAT CUSHION HINGE PLATE
              Remove the 2 nuts and seat cushion hinge plate from the seat-
              back frame.
              11. REMOVE SEATBACK ASSEMBLY
              Remove the 4 bolts and seatback assembly.
              12. REMOVE 4 CRS TETHER ANCHOR BRACKETS
     H11243   (a) Remove the bolt and CRS tether anchor bracket.
              (b) Perform the same procedure on the other CRS tether an-
                   chors.
BO-206
                    BODY   -   REAR SEAT (Bench Type)

                  13. REMOVE CENTER ARMREST
                  Remove the 2 nuts and center armrest from the seatback as-
                  sembly.
                  14. REMOVE CUP HOLDER
                  Remove the 4 screws and cup holder from the center armrest.




         H11518



                  15.   REMOVE CENTER ARMREST HINGE
                  (a)   Using a screwdriver, remove the center armrest hinge
                        cover.
                  HINT:
                  Tape the screwdriver tip before use.
                  (b) Perform the same procedure on the other side.



         H11245



                  (c)   Remove the 2 bolts and center armrest hinge.
                  16.   REMOVE HEADREST SUPPORTS




         H11246



                  17.   REMOVE SEATBACK COVER
                  (a)   Remove the hog rings from the rear side of the seatback
                        assembly.




         H11247



                  (b)   Remove the hog rings and seatback cover.




         H11248

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo