Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be gdosydou regpro
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download regpro documenatation <<
Text preview - extract from the document
BE-203
BODY ELECTRICAL - GARAGE DOOR OPENER SYSTEM (Double Cab)
GARAGE DOOR OPENER SYSTEM
(Double Cab) BE2KG-01
REGISTRATION PROCEDURE
REGISTER TRANSMITTER CODE
HINT:
The vehicle's garage door opener records transmitter codes for
Indicator systems such as garage doors, gates, entry gates, door locks,
I27622
home lighting systems, security systems or other transmitter
code based systems. The garage door opener is built into the
roof console box assembly. After the console box assembly is
replaced, transmitter codes for any systems previously regis-
tered in the garage door opener must be re-registered.
(a) Re-register systems in the garage door opener registra-
tion mode.
NOTICE:
S Do not perform transmitter code registration for a
system if people or objects are near the system to be
registered. When registering transmitter codes, inju-
ry or damage can occur as the system may open,
close, unlock or otherwise operate.
S Before transmitter code registration, stop the engine
and remove the key from the ignition switch.
S The garage door opener cannot be used with: 1) sys-
tems that: 1) were manufactured before April 1, 1982;
or 2) systems that do not meet Federal Safety Stan-
dards (for example, garage doors without a jam
protection function).
HINT:
S 3 transmitter codes can be registered with the garage
door opener, one transmitter code for each of the 3 ga-
rage door opener switches.
S Disconnecting the battery will not erase the transmitter
codes registered with the garage door opener.
S An attempt to overwrite a previously registered transmit-
ter code with a new system's transmitter code may fail. In
these situations, the previously registered transmitter
code will not be erased.
BE-204
BODY ELECTRICAL - GARAGE DOOR OPENER SYSTEM (Double Cab)
(1) Select a switch of the garage door opener for the
transmitter code registration.
(2) Press and hold the selected switch for 20 seconds.
Then, the garage door opener enters registration
mode.
HINT:
Before entering registration mode, the indicator shows the dis-
Indicator play. After entering registration mode, the indicator flashes at
I27622 a cycle of 1 Hz. For a "rolling code" type system, after entering
registration mode, the indicator flashes at a cycle of 8.8 Hz for
1.6 seconds, and then the indicator flashes at a cycle of 1 Hz.
(3) After the garage door opener has entered registra-
tion mode, bring the original transmitter of the sys-
tem to be registered within 1 to 3 inches of the ga-
rage door opener and press and hold one of the
garage door opener switches. Then press the origi-
Press nal transmitter switch.
(4) If the transmitter code registration was successful,
Original the indicator of the garage door opener flashes at
Transmitter a cycle of 5.6 Hz. If no malfunction occurs, release
I18598
both the garage door opener switch and the original
transmitter switch.
HINT:
S If transmitter code registration fails: 1) the original trans-
mitter's battery may be low or need to be replaced, or 2)
the system to be registered may not be compatible with
the garage door opener.
S Some transmitter's signals stop after 1 to 2 seconds. For
these types of transmitters: 1) press and hold one of the
garage door opener switches, and 2) press and release
(cycle) the transmitter switch every 2 seconds. Check if
the transmitter code was successfully registered.
S After entering the garage door opener registration mode,
transmitter code registration must be completed within 90
seconds. If 90 seconds elapses, the garage door opener
will enter low power mode (See step (c)).
BE-205
BODY ELECTRICAL - GARAGE DOOR OPENER SYSTEM (Double Cab)
Timing chart of registration mode:
Garage Door PRESSED
Opener Switch
RELEASED
Registration ENTER
20 sec.
Mode
EXIT
ON
Indicator
Operation
OFF
Indicator flashes
at a cycle of 1 Hz
Indicator flashes
at a cycle of 5.6 Hz
Original ON
Transmitter
OFF
I03487
(b) Erase transmitter codes in the garage door opener clear
mode.
HINT:
S All 3 registered transmitter codes must be erased at the
same time.
S If the switches are released within 10 seconds after the
transmitter codes have been erased, the garage door
Indicator opener will enter registration mode.
I27622 S If the switches are held for 10 seconds or more after the
transmitter codes have been erased, default codes will be
set to the 3 switches of the garage door opener. Using
these default codes, you can check operation of the ga-
rage door opener can be checked using a tester.
Press and hold the left and right switch of the garage door
opener for 20 seconds. The indicator will begin to flash at
a cycle of 5.6 Hz. Releasing the switches will end clear
mode.
BE-206
BODY ELECTRICAL - GARAGE DOOR OPENER SYSTEM (Double Cab)
Timing chart of clear mode:
Garage Door
PRESSED
Opener Switches
(at both end)
RELEASE Enter clear mode to erase
all 3 codes Load Default Code
ON
Clear Mode/Default Mode 20 sec. 10 sec.
OFF
ON
Indicator Operation
OFF
Indicator flashes at a cycle of 5.6 Hz
I27125
(c) Low power mode:
If a garage door opener switch is held for 55 seconds or
more, the garage door opener will enter low power mode
to economize on power consumption. When the garage
door opener has entered low power mode, the indicator
turns off.
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo