Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be hatsy adju

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download adju documenatation <<

Text preview - extract from the document

BE-46
             BODY ELECTRICAL   -   HEADLIGHT AND TAILLIGHT SYSTEM
                                                                    BE173-05


ADJUSTMENT



                                             For Adjustment in
                                             Vertical Direction




                                                                      I27016
                                                                                                          BE-47
                                       BODY ELECTRICAL   -    HEADLIGHT AND TAILLIGHT SYSTEM

ADJUST HEADLIGHT AIM ONLY
(a) Place the vehicle in the following conditions.
       S   The area where the headlight aiming is not deformed.
       S   The vehicle is parked in a flat area.
       S   The tire inflation pressure is at the specified value.
       S   A driver is in the driver side seat, the vehicle is ready for driving and with the tank is full.
       S   The vehicle has been bounced several times.
(b) Check the headlight aiming.
      (1) Prepare thick white paper.
      (2) Put the paper perpendicularly on a ground at the position 3 m (9.84 ft) away from the headlights.
      (3) Make sure that the center line of the vehicle and the paper face forms a 90-degree angle as
           shown in the illustration.
      (4) Draw a horizontal line (H line) across the paper so that it is at the same height as the center mark
           of the low beam lamp on the vehicle.
      (5) Draw a vertical line (V line) to where the center line of the vehicle is to be.
      (6) Draw 2 vertical lines to where the headlights should strike (V RH and V LH lines).
      (7) Draw a horizontal line by connecting both low beam center marks to where the headlights should
           strike (H RH and H LH lines).
HINT:
The H RH and H LH lines are 0.4

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo