Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be ilsydouc insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
BE-57
BODY ELECTRICAL - INTERIOR LIGHT SYSTEM (Double Cab)
BE2K9-01
INSPECTION
1. INSPECT FRONT PERSONAL LIGHT SWITCH CONTI-
3 NUITY
(a) Disconnect the connector from the personal light.
1 (b) Push the personal light switch on, check that continuity
exists between terminals 1 and 3.
If the continuity is not as specified, replace the bulb or light.
Front Personal Light
I18755
2. INSPECT DOME LIGHT SWITCH CONTINUITY
(a) Disconnect the connector from the dome light.
(b) Push the personal light switch on, check that continuity
1 exists between terminals 1 and 3.
3 If the continuity is not as specified, replace the bulb or light.
I18563
(c) Turn the light switch to the DOOR position, check that
continuity exists between terminals 2 and 3.
3 If the continuity is not as specified, replace the light.
2
I18564
3. INSPECT DOOR COURTESY SWITCH CONTINUITY
ON (a) Check that continuity exists between the terminal and the
Ohmmeter switch body with the switch ON (switch pin released: door
opened).
(b) Check that no continuity exists between the terminal and
OFF the switch body with the switch OFF (switch pin pushed
in: door closed).
If the continuity is not as specified, replace the switch.
N20159
4. INSPECT DOOR COURTESY LIGHT CONTINUITY
Check that continuity exists between terminals 1 and 2.
If the continuity is not as specified, replace the light assembly
or bulb.
I04056
BE-58
BODY ELECTRICAL - INTERIOR LIGHT SYSTEM (Double Cab)
5. INSPECT VANITY LIGHT CONTINUITY
Switch Position Tester Connection Specified Condition
OFF (Closed) 1-2 No continuity
ON (Opened) 1-2 Continuity
If the continuity is not as specified, replace the bulb or vanity
light.
I18562
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo