Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be ilsyexcd insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
BE-61
BODY ELECTRICAL - INTERIOR LIGHT SYSTEM (Except Double Cab)
BE2KB-01
INSPECTION
1. INSPECT FRONT PERSONAL LIGHT CONTINUITY
1
(a) Disconnect the connector from the personal light.
3 (b) Push the personal light switch ON, check that continuity
exists between terminals 3 and 1.
I11933
(c) Turn the light switch to the DOOR position, check that
2 continuity exists between terminals 2 and 3.
If the result is not as specified, replace the bulb or light.
DOOR 3
I03096
2. INSPECT ROOM LIGHT CONTINUITY
(a) Disconnect the connector from the light.
(b) Turn the interior light switch ON, check that continuity ex-
ists between terminal 2 and body ground.
2
N08313
(c) Turn the light switch to the DOOR position, check that
1 continuity exists between terminals 1 and 2.
If the result is not as specified, replace the bulb or light.
2
N08314
3. INSPECT (FRONT) DOOR COURTESY SWITCH CON-
Released TINUITY
(a) Check that continuity exists between the terminal and the
Ohmmeter
switch body with the switch ON (switch pin released: door
opened).
Pushed (b) Check that no continuity exists between terminals and the
switch body with the switch OFF (switch pin pushed in:
door closed).
N20159 If the result is not as specified, replace the switch.
BE-62
BODY ELECTRICAL - INTERIOR LIGHT SYSTEM (Except Double Cab)
4. Access door:
INSPECT REAR UPPER DOOR COURTESY SWITCH
CONTINUITY
Switch Position Tester Connection Specified Condition
ON (Open) 1-2 Continuity
ON (Half latch) 1-2 Continuity
OFF (Full latch) 1-2 No continuity
If the continuity is not as specified, replace the upper door lock.
Open Half Latch Full Latch
2 1
I24719
5. Access door:
INSPECT REAR LOWER DOOR COURTESY SWITCH
CONTINUITY
Switch Position Tester Connection Specified Condition
ON (Open) 1-2 Continuity
ON (Half latch) 1-2 Continuity
OFF (Full latch) 1-2 No continuity
If the continuity is not as specified, replace the lower door lock.
Open Half Latch Full Latch
2 1
I24767
6. INSPECT DOOR COURTESY LIGHT CONTINUITY
Check that continuity exists between terminals 1 and 2.
If the continuity is not as specified, replace the bulb or light.
I04056
BE-63
BODY ELECTRICAL - INTERIOR LIGHT SYSTEM (Except Double Cab)
7. INSPECT VANITY LIGHT CONTINUITY
Switch Position Tester Connection Specified Condition
OFF (Closed) 1-2 No continuity
ON
ON (Opened) 1-2 Continuity
21
If the continuity is not as specified, replace the bulb or vanity
OFF light.
N17456
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo