Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be powout insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
BE-34
BODY ELECTRICAL - POWER OUTLET
BE2K1-01
INSPECTION
1. Double cab (115 V):
INSPECT MAIN SWITCH CONTINUITY
Switch Position Tester Connection Specified Condition
ON 3-6 Continuity
OFF 3-6 No continuity
If the continuity is not as specified, replace the switch.
I27133
2. Double cab (115 V):
2 INSPECT MAIN SWITCH INDICATOR LIGHT OPERA-
TION
(a) Connect the positive (+) lead from the battery to terminal
3 3 and the negative (-) lead to terminal 2.
(b) Push the main switch and check that the indicator light
turns on.
If operation is not as specified, replace the switch.
I27134
3. Double cab (115 V):
1 2 INSPECT INVERTER RELAY CONTINUITY
Tester Connection Specified Condition
3 5
3-5 No continuity
5 Continuity
1 2 3-5
(When battery voltage is applied to terminals 1 and 2)
If the continuity is not as specified, replace the switch.
3
I01200
4. Double cab (12 V):
5 INSPECT ACC RELAY AND ACC CUT RELAY CONTI-
1 2
NUITY
Tester Connection Specified Condition
3-5 No continuity
Continuity
3-5
(When battery voltage is applied to terminals 1 and 2)
3 If the continuity is not as specified, replace the switch.
I24626
5. Except double cab:
1 2 INSPECT POWER OUTLET RELAY (Marking: PWR
OUTLET) CONTINUITY
3 5
Tester Connection Specified Condition
5 3-5 No continuity
1 2
Continuity
3-5
(When battery voltage is applied to terminals 1 and 2)
3 If the continuity is not as specified, replace the switch.
I01200
BE-35
BODY ELECTRICAL - POWER OUTLET
6. Double cab (115 V):
Wire Harness Side
INSPECT VOLTAGE INVERTER CIRCUIT
Disconnect the connector from the voltage inverter and check
the connector on the wire harness side, as shown in the table.
Main Switch Position Tester Connection Specified Condition
ON 1-4 10 - 14 V
OFF 1-4 No continuity
If the result is not as specified, replace the inverter.
I24374
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo