Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be tratowdo insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
BE-210
BODY ELECTRICAL - TRAILER TOWING (Double Cab)
BE2KD-01
Wire Harness Side INSPECTION
1. INSPECT TOWING CONVERTER CIRCUIT
Remove the towing converter with the connector still connected
and inspect the wire harness side connector from the backside,
as shown in the table.
I24381
Tester Connection Condition Specified Condition
1-6 Constant 10 - 14 V
Turn signal switch RIGHT or hazard warning switch ON 10 - 14 V Below 1 V
Turn signal switch RIGHT and stop light switch ON (brake pedal depressed) 10 - 14 V Below 1 V
2-6 Turn signal switch OFF, hazard warning switch OFF and sto light switch OFF
stop
Below 1 V
B l
(brake pedal released)
Stop light switch ON (brake pedal depressed) 10 - 14 V Below 1 V
Turn signal switch RIGHT or hazard warning switch ON 10 - 14 V Below 1 V
3-6
Turn signal switch OFF or LEFT and hazard warning switch OFF Below 1 V
Turn signal switch LEFT or hazard warning switch ON 10 - 14 V Below 1 V
Turn signal switch LEFT and stop light switch ON (brake pedal depressed) 10 - 14 V Below 1 V
4-6 Turn signal switch OFF, hazard warning switch OFF and stop light switch OFF
Below 1 V
(brake pedal released)
Stop light switch ON (brake pedal depressed) 10 - 14 V
Stop light switch ON (brake pedal depressed) 10 - 14 V
6-8
Stop light switch OFF (brake pedal released) Below 1 V
Turn signal switch LEFT or hazard warning switch ON 10 - 14 V Below 1 V
6-9
Turn signal switch OFF or RIGHT and hazard warning switch OFF Below 1 V
6 - Body ground Constant Continuity
If the result is as specified, replace the towing converter.
2. INSPECT TOWING TAIL RELAY CONTINUITY
1 2 Tester Connection Specified Condition
3-5 No continuity
3 5
Continuity
5 3-5
(When battery voltage is applied to terminals 1 and 2)
2 1
3 If the continuity is not as specified, replace the relay.
N14863
BE-211
BODY ELECTRICAL - TRAILER TOWING (Double Cab)
3. INSPECT BATTERY CHARGE RELAY (Marking: BATT
1 CHARGE) CONTINUITY
2
Tester Connection Specified Condition
3 5
3-5 No continuity
5
Continuity
2 1 3-5
(When battery voltage is applied to terminals 1 and 2)
3
If the continuity is not as specified, replace the relay.
N14863
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo