Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra be tsahwsy insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
BE-53
BODY ELECTRICAL - TURN SIGNAL AND HAZARD WARNING SYSTEM
BE2K7-01
Right Turn INSPECTION
1. INSPECT TURN SIGNAL SWITCH CONTINUITY
Switch Position Tester Connection Specified Condition
Left turn 1-2 Continuity
Original 1 -2, 2 - 3 No continuity
Right turn 2-3 Continuity
If the continuity is not as specified, replace the switch.
Left Turn
8 7 6 5 4 3 2 1
17 16 15 14 13 12 11 10 9
I12796
2. INSPECT TURN SIGNAL FLASHER RELAY CIRCUIT
Wire Harness Side
Disconnect the connector from the turn signal flasher and in-
spect the connector on the wire harness side, as shown in the
table.
I04046
Tester Connection Condition Specified Condition
1 - Body ground Ignition switch LOCK or ACC Below 1 V
1 - Body ground Ignition switch ON 10 - 14 V
2 - Body ground Constant Continuity
3 - Body ground Constant Continuity
4 - Body ground Constant 10 - 14 V
5 - Body ground Turn signal switch RIGHT or OFF No Continuity
5 - Body ground Turn signal switch LEFT Continuity
6 - Body ground Turn signal switch LEFT or OFF No Continuity
6 - Body ground Turn signal switch RIGHT Continuity
7 - Body ground Constant Continuity
8 - Body ground Hazard warning switch OFF No Continuity
8 - Body ground Hazard warning switch ON Continuity
If the result is as specified, replace the flasher.
BE-54
BODY ELECTRICAL - TURN SIGNAL AND HAZARD WARNING SYSTEM
3. Double cab:
INSPECT HAZARD WARNING SWITCH CONTINUITY
(a) Remove the integration control panel.
(b) Check that the continuity exists between terminal 16 and
terminal 10 with the switch ON.
(c) Check that no continuity exists between terminal 16 and
terminal 10 with the switch OFF.
If the continuity is not as specified, replace the panel.
16
10
I27501
4. Except double cab:
INSPECT HAZARD WARNING SWITCH CONTINUITY
(a) Remove the integration control panel.
(b) Check that the continuity exists between terminal 17 and
terminal 1 with the switch ON.
(c) Check that no continuity exists between terminal 17 and
terminal 1 with the switch OFF.
If the continuity is not as specified, replace the panel.
1
17
I27432
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo