Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra br fbc insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

BR-44
                  BRAKE   -   FRONT BRAKE CALIPER
                                                                              BR10O-05


                 INSPECTION
                 1.    MEASURE PAD LINING THICKNESS
                 Using a ruler, measure the pad lining thickness.
                       Standard thickness: 11.5 mm (0.453 in.)
                       Minimum thickness: 1.0 mm (0.039 in.)
                 Replace the pad if the thickness is less than the minimum (the
                 1.0 mm slit is no longer visible), or if it shows signs of uneven
                 wear.
        R13543



                 2.    MEASURE DISC THICKNESS
                 Using a micrometer, measure the disc thickness.
                       Standard thickness: 28.0 mm (1.102 in.)
                       Minimum thickness: 26.0 mm (1.024 in.)
                 Replace the disc if the thickness of the disc is at the minimum
                 or less. Replace the disc or grind it on a lathe if it is scored or
                 worn unevenly.

        R13544



                 3.     MEASURE DISC RUNOUT
                 Using a dial indicator, measure the disc runout at a position 10
                 mm (0.39 in.) from the outside edge.
                        Maximum disc runout: 0.07 mm (0.0028 in.)
                 If the runout is greater than the maximum, replace the disc or
                 grind it on an "On-Car" brake lathe.
                 HINT:
                 Before measuring the runout, confirm that the front hub bearing
        R13545   play is within specifications (see page SA-20).
                 4.     IF NECESSARY, ADJUST DISC RUNOUT
                 (a) Remove the hub nuts and disc. Reinstall the disc 1/6 of
                        a turn round from its original position on the hub. Install
                        and torque the hub nuts.
                        Torque: 113 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo