Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra br fbp repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

BR-40
                  BRAKE   -   FRONT BRAKE PAD
                                                                              BR10K-05


                 REPLACEMENT
                 1.    REMOVE FRONT WHEEL
                 2.    INSPECT PAD LINING THICKNESS
                 Check the pad thickness and replace pads if not within specifi-
                 cation.
                       Minimum thickness: 1.0 mm (0.039 in.)


        F07748



                 3.    REMOVE CLIP, 2 PINS AND ANTI-RATTLE SPRING
                 4.    REMOVE 2 PADS AND 4 ANTI-SQUEAL SHIMS
                 NOTICE:
                 The anti-rattle spring and clip can be used again provided
                 that they have sufficient rebound, no deformation, cracks
                 or wear, and have had all rust, dirt and foreign particles
                 cleaned off.
                 5.    CHECK DISC THICKNESS AND RUNOUT
        F07749         (See page BR-44)

                 6.    INSTALL NEW PADS
                 NOTICE:
                 When replacing worn pads, the anti-squeal shims must be
                 replaced together with the pads.
                 (a) Draw out a small amount of brake fluid from the reservoir.
                 (b) Press in the pistons with a monkey wrench handle or
                       equivalent.
                 HINT:
        R13537    S    Tape the monkey wrench handle before use.
                  S    Always change the pads on one wheel at a time as there
                       is a possibility of the opposite piston flying out.
                  S    If the piston is difficult to push in, loosen the bleeder plug
                       and push in the piston while letting some brake fluid es-
                       cape.
                 (c) Install the anti-squeal shims to new pads.
                 HINT:
                 Apply disc brake grease to both sides of the inner anti-squeal
                 shims (See page BR-39).
                 (d) Install new pads.
                 NOTICE:
                 Do not allow oil or grease to come in contact with the rub-
                 bing face.
                 7.    INSTALL ANTI-RATTLE SPRING AND 2 PINS
                 8.    INSTALL CLIP
                 9.    INSTALL FRONT WHEEL
                       Torque: 113 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo