Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra br rdb insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                  BR-51
         BRAKE   -   REAR DRUM BRAKE
                                                                    BR087-05


         INSPECTION
         1.   INSPECT DISASSEMBLED PARTS
         Inspect the disassembled parts for wear, rust or damage.




         2.     MEASURE BRAKE DRUM INSIDE DIAMETER
         Using a brake drum gauge or equivalent, measure the inside di-
         ameter of the drum.
                Standard inside diameter: 295.0 mm (11.614 in.)
                Maximum inside diameter: 297.0 mm (11.693 in.)
         If the drum is scored or worn, the brake drum may be lathed to
         the maximum inside diameter.

F06408



         3.     MEASURE BRAKE SHOE LINING THICKNESS
         Using a ruler, measure the shoe lining thickness.
                Standard thickness: 6.0 mm (0.236 in.)
                Minimum thickness: 1.0 mm (0.039 in.)
         If the shoe lining is less than the minimum, or shows signs of
         uneven wear, replace the brake shoes.
         HINT:
         If any of the brake shoes have to be replaced, replace all of the
BR0047   brake shoes in order to maintain even braking.

         4.     INSPECT BRAKE LINING AND DRUM FOR PROPER
                CONTACT
         Apply chalk to the inside surface of the drum, then grind down
         the brake shoe lining to fit.
         If the contact between the brake lining and drum is improper, re-
         pair the lining with a brake shoe grinder, or replace the brake
         shoe assembly.

BR0048

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo