Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra di eg1grfe cip0630
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cip0630 documenatation <<
Text preview - extract from the document
DI-281
DIAGNOSTICS - ENGINE (1GR-FE)
DIDTY-01
DTC P0630 VIN not Programmed or Mismatch ECM/PCM
CIRCUIT DESCRIPTION
DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the Engine Control Module
(ECM) or the input VIN is not accurate. Input the VIN with the hand-held tester.
DTC No. DTC Detecting Condition Trouble Area
S VIN is not stored in ECM.
P0630 ECM
S Input VIN in ECM is not accurate.
MONITOR STRATEGY
Related DTCs P0630 VIN not programmed
Main sensors/components ECM
Required sensors/components
R i d / t
Related sensors/components -
Frequency of operation Continuous
Duration 0.5 sec.
MIL operation Immediate
Sequence of operation None
TYPICAL ENABLING CONDITIONS
Specification
Item
It
Minimum Maximum
The monitor will run whenever this DTC is
See page DI-18
not present
Battery voltage 8V -
Ignition switch ON
Starter OFF
TYPICAL MALFUNCTION THRESHOLDS
Detection Criteria Threshold
VIN code Not programmed
COMPONENT OPERATING RANGE
Parameter Standard Value
VIN code Programmed
DI-282
DIAGNOSTICS - ENGINE (1GR-FE)
INSPECTION PROCEDURE
1 Read current DTC.
NOTICE:
If P0630 is present, the VIN must be input to the ECM using the hand-held tester. However, all DTCs
are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are present,
check them first.
NEXT
2 Input VIN with hand-held tester (See page DI-14).
NEXT
END
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo