Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra di eg1grfe dlat

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download dlat documenatation <<

Text preview - extract from the document

                                                                                                                                           DI-47
                                               DIAGNOSTICS           -     ENGINE (1GR-FE)
                                                                                                                                           DIDT3-01


DATA LIST / ACTIVE TEST
1.    DATA LIST
HINT:
By reading the DATA LIST displayed on a hand-held tester, you can check values, including those of the
switches, sensors, and actuators, without removing any parts. Reading the DATA LIST as the first step of
troubleshooting is one method of shortening diagnostic time.
NOTICE:
In the table below, the values listed under Normal Conditions are for reference only. Do not depend
solely on these values when determining whether or not a part is faulty.
(a) Warm up the engine.
(b) Turn the ignition switch to OFF.
(c) Connect a hand-held tester to the DLC3.
(d) Turn the ignition switch to ON.
(e) Turn the tester ON.
(f)   Select the following menu items: DIAGNOSIS / ENHANCED OBD II / DATA LIST.
(g) Check the values by referring to the table below.
                                  Measurement Item:Range
   Hand-Held Tester Display                                                       Normal Condition *                   Diagnostic Note
                                         (Display)

                              Injection period of the No. 1 cylin-
         INJECTOR             der:                                       2.3 to 3.8 ms: Idling                                
                              Min.: 0 ms, Max.: 32.64 ms
                              Ignition timing advance for No. 1
       IGN ADVANCE            cylinder/                                  BTDC 4 to 17

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo