Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra di eg1grfe otr
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download otr documenatation <<
Text preview - extract from the document
DI-24
DIAGNOSTICS - ENGINE (1GR-FE)
DIDSV-01
O2S TEST RESULT
INTRODUCTION
The O2S TEST RESULT refers to the results of the engine con-
trol module (ECM) when it monitors the oxygen sensor (O2S),
and it can be read using the hand-held tester. Based on this,
you can find the O2S's conditions.
The ECM monitors the O2S in the various items. You can read
the monitor result (TEST DATA) of each monitor item using the
O2S TEST RESULT. However, the output value of the TEST
DATA is the latest "snapshot" value that is taken after monitor-
ing and therefore it is not dynamic.
In this repair manual, the description of the O2S TEST RESULT
(for O2S related DTCs) are written in a table.
This table consists of 5 items:
(1) TEST ID (a code applied to each TEST DATA)
(2) Description of TEST DATA
(3) Conversion Factor (When Conversion Factor has a
value written in the table, multiply the TEST DATA
value appearing on the scan tool by the Conversion
Factor value. The result will be the required value.)
(4) Unit
(5) Standard Value
If the TEST DATA value appearing on the scan tool is out of the
standard value, the O2S is malfunctioning. If it is within the stan-
dard value, the O2S is functioning normally. However, if the val-
ue is on the borderline of the standard value, the O2S may mal-
function very soon.
HOW TO READ O2S TEST RESULT USING HAND-HELD
TESTER
(a) Connect the hand-held tester to the DLC3.
(b) On the tester screen, select the following menus: DIAG-
O2S TEST RESULT Screen
NOSIS / CARB OBDII / O2S TEST RESULT. A list of the
O2 SENSOR TEST O2S equipped on the vehicle will be displayed.
01 BANK 1 - SENSOR 1
02 BANK 1 - SENSOR 2
03 BANK 2 - SENSOR 1
04 BANK 2 - SENSOR 2
A21190
DI-25
DIAGNOSTICS - ENGINE (1GR-FE)
(c) Select the desired O2S and press ENTER. The following
TEST DATA Screen
screen will appear.
LOW SW V . . . . . .0.400 V (d) Press HELP and : simultaneously. More information will
HIGH SW V . . . . . .0.550 V appear.
MIN O2S V . . . . . . 0.035 V (e) Example:
MAX O2S V . . . . . 0.835 V
(1) The hand-held tester displays "17" as a value of the
Time $81 . . . . . . . . . . . 17
Time $84 . . . . . . . . . . . 84 "TIME $81" (see the illustration on the left).
Time $85 . . . . . . . . . . . 79 (2) Find the Conversion Factor value of "TIME $81" in
A21191 the O2S TEST RESULT chart below. 0.3906 is spe-
cified for $81 in this chart.
(3) Multiply "17" in step (1) by 0.3906 (Conversion Fac-
tor) in the step (2).
17 x 0.3906 = 6.6 %
(4) If the answer is within the standard value, the "TIME
$81" can be confirmed to be normal.
O2S TEST RESULT Chart
TEST ID Description of TEST DATA Conversion Factor Unit Standard Value
Percentage of monitoring time
$81 when the HO2S voltage is less Multiply 0.3906 % Within 60 %
than 0.05V
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo