Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra em1grfe cylhea reas
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download reas documenatation <<
Text preview - extract from the document
EM-82
ENGINE MECHANICAL (1GR-FE) - CYLINDER HEAD
EM1XT-01
REASSEMBLY
1. INSTALL RING PIN
Using a plastic-faced hammer, tap in the new ring pins until
they reach the specified protrusion height.
Specified protrusion height:
2.7 to 3.3 mm (0.106 to 0.130 in.)
Cylinder Head RH Side: Cylinder Head LH Side:
11 mm
Protrusion
8 mm Height
Engine Engine
Front Front
A22946
EM-83
ENGINE MECHANICAL (1GR-FE) - CYLINDER HEAD
2. INSTALL STRAIGHT PIN
Using a plastic-faced hammer, tap in the new straight pins until
they reach the specified protrusion height.
Specified protrusion height:
A 17.5 to 19.5 mm (0.689 to 0.768 in.)
B 7.5 to 8.5 mm (0.295 to 0.335 in.)
C 7.0 to 9.0 mm (0.276 to 0.354 in.)
Cylinder Head RH Side:
Upper Side:
Front Side:
A
B
Intake Manifold Side:
Cylinder Head LH Side: C
Upper Side:
Front Side:
A
B
Intake Manifold Side:
8 mm
5 mm
Protrusion
34 mm Height 13.8 mm Protrusion
Height
C
B and C
A
A22947
EM-84
ENGINE MECHANICAL (1GR-FE) - CYLINDER HEAD
3. INSTALL STUD BOLT
Using the Torx◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo