Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra em1grfe exhsys repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

                                                                           EM-139
ENGINE MECHANICAL (1GR-FE)   -   EXHAUST SYSTEM
                                                                             EM1Y4-01


                    REPLACEMENT
                    1.    REMOVE EXHAUST TAIL PIPE
                    (a)   Remove the bolt and clamp.
                    (b)   Remove the 3 exhaust pipe supports and exhaust tail
                          pipe.



           A23249



                    2.    REMOVE EXHAUST CENTER PIPE
                    (a)   Remove the 2 bolts and springs.
                    (b)   Remove the 2 bolts.
                    (c)   Remove the 2 exhaust pipe support and exhaust center
                          pipe.
                    (d)   Remove the gasket from the exhaust tail pipe.
                    3.    REMOVE HEATED OXYGEN SENSOR
                          (BANK 1 OXYGEN SENSOR)
           A23248   (a)   Disconnect the heated oxygen sensor.
                    (b)   Remove the heated oxygen sensor.
                    4.    REMOVE RH FRONT EXHAUST PIPE
                    (a)   Remove the 2 nuts and RH front exhaust pipe.
                    (b)   Remove the 2 gaskets from the RH front exhaust pipe.
                    5.    REMOVE HEATED OXYGEN SENSOR
                          (BANK 2 OXYGEN SENSOR)
                    (a)   Disconnect the heated oxygen sensor connector.
                    (b)   Remove the heated oxygen sensor.

           A23247



                    6.    REMOVE LH FRONT EXHAUST PIPE
                    (a)   Remove the 2 nuts, exhaust pipe support and LH front ex-
                          haust pipe.
                    (b)   Remove the 2 gaskets from the LH front exhaust pipe.




           A23246



                    7.    INSTALL RH FRONT EXHAUST PIPE
                    (a)   Install 2 new gaskets to the LH front exhaust pipe.
                    (b)   Install the LH front exhaust pipe with the 2 new nuts.
                          Torque: 62 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo