Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra em2uzfe timbel insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
EM-21
ENGINE MECHANICAL (2UZ-FE) - TIMING BELT
EM0KX-08
INSPECTION
NO ! 1. INSPECT TIMING BELT
NOTICE:
S Do not bend, twist or turn the timing belt inside out.
S Do not allow the timing belt to come into contact with
oil, water or steam.
S Do not utilize timing belt tension when installing or re-
moving the mount bolt of the camshaft timing pulley.
EM3336
If there is any defect, as shown in the illustration, check these
points:
(a) Premature parting
S Check for proper installation.
S Check the timing cover gasket for damage and
proper installation.
(b) If the belt teeth are cracked or damaged, check to see if
either camshaft is locked.
(c) If there is noticeable wear or cracks on the belt face,
check to see if there are nicks on the side of the idler
pulley lock and water pump.
(d) If there is wear or damage on even one side of the belt,
check the belt guide and the alignment of each pulley.
(e) If there is noticeable wear on the belt teeth, check timing
cover for damage and for foreign material on the pulley
teeth.
If necessary, replace the timing belt.
2. INSPECT IDLER PULLEYS
(a) Visually check the seal portion of the idler pulley for oil
leakage.
If leakage is found, replace the idler pulley.
(b) Check that the idler pulley turns smoothly.
If necessary, replace the idler pulley.
P20079
3. INSPECT TIMING BELT TENSIONER
(a) Visually check the seal portion of the tensioner for oil leak-
age.
HINT:
If there is only the faintest trace of oil on the seal on the push
rod side, the tensioner is all right.
If leakage is found, replace the tensioner.
P20633
EM-22
ENGINE MECHANICAL (2UZ-FE) - TIMING BELT
(b) Hold the tensioner with both hands and push the push rod
strongly as shown to check that it doesn't move.
If the push rod moves, replace the tensioner.
NOTICE:
Never hold the tensioner push rod facing downward.
P20634
(c) Measure the protrusion of the push rod from the housing
end.
Protrusion
Protrusion: 10.5 to 11.5 mm (0.413 to 0.453 in.)
If the protrusion is not as specified, replace the tensioner.
4. INSPECT WATER PUMP (See page CO-7)
P20635
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo