Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra lu1grfe oaf repl
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download repl documenatation <<
Text preview - extract from the document
LU-3
LUBRICATION (1GR-FE) - OIL AND FILTER
LU0Q9-01
REPLACEMENT
CAUTION:
S Prolonged and repeated contact with engine oil will
result in the removal of natural oils from the skin,
leading to dryness, irritation and dermatitis. In addi-
tion, used engine oil contains potentially harmful
contaminants which may cause skin cancer.
S Precautions should be taken when replacing engine
oil to minimize the risk of contact with used engine oil.
Protective clothing and gloves that cannot be pene-
trated by oil should be worn. The skin should be
washed with soap and water, or use water-less hand
cleaner, to remove any used engine oil thoroughly. Do
not use gasoline, thinners, or solvents.
S In order to preserve the environment, used oil and
used oil filters must be disposed of at designated dis-
posal sites.
1. DRAIN ENGINE OIL
(a) Remove the engine under cover seal No. 3.
(b) Remove the oil pan drain plug and drain the engine oil.
(c) Clean the oil pan drain plug and install it and a new gas-
ket.
Torque: 40 Nm (408 kgfcm, 30 ftlbf)
2. REMOVE OIL FILTER
SST When using a container:
(a) Remove the drain pipe cap.
(b) While removing the oil filter with SST, catch the oil from the
oil filter with a container.
SST 09228-07501
Drain Pipe
(c) Install the drain pipe cap.
(d) Clean the oil catch plate.
A23128
When using a drain hose:
(e) Remove the drain pipe cap.
(f) Connect a drain hose to the oil filter bracket.
HINT:
S Drain hose inside diameter: 8 mm (0.31 in.)
S Drain hose length: 900 mm (35.43 in.)
(g) Pass the drain hose down through the engine under cov-
Drain Hose er, and put the drain oil container beneath the drain hose
A23129 in order to catch the oil from the oil filter.
LU-4
LUBRICATION (1GR-FE) - OIL AND FILTER
(h) Using SST, remove the oil filter.
SST 09228-07501
(i) Remove the drain hose and install the drain pipe cap.
SST
(j) Clean the oil catch plate.
A23130
3. INSTALL OIL FILTER
(a) Clean the oil filter contact surface on the oil filter bracket.
(b) Lubricate the rubber gasket of a new oil filter with clean
engine oil.
(c) Tighten the oil filter by hand until the rubber gasket con-
tacts the seat of the filter bracket.
A23131
(d) Using SST, give it an additional 3/4 turn to set the filter.
SST 09228-07501
SST 3/4 Turn 4. ADD ENGINE OIL
(a) Fill with new engine oil.
Capacity:
Drain and refill:
w/ Oil filter change: 4.5 liters (4.8 US qts, 4.0 lmp. qts)
w/o Oil filter change: 4.2 liters (4.4 US qts, 3.7 lmp. qts)
A23132 Dry fill: 5.6 liters (5.9 US qts, 4.9 lmp. qts)
(b) Reinstall the oil filler cap.
5. CHECK FOR ENGINE OIL LEAKS
6. CHECK ENGINE OIL LEVEL
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo