Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra lu1grfe oilpum insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                         LU-13
LUBRICATION (1GR-FE)   -   OIL PUMP
                                                                           LU0QC-01


              INSPECTION
              1.      INSPECT OIL PUMP RELIEF VALVE
                      Coat the valve with engine oil and check that it falls
                      smoothly into the valve hole by its own weight.
              If it does not, replace the relief valve. If necessary, replace the
              oil pump assembly.


     A23136



              2.    INSPECT OIL PUMP ROTOR SET
              (a)   Place the drive and driven rotors into the timing chain cov-
                    er with the marks facing upward.




     A23137



              (b)    Inspect rotor tip clearance.
                     Using a feeler gauge, measure the clearance between
                     each drive and driven rotor tip.
                     Standard clearance:
                     0.06 to 0.16 mm (0.0024 to 0.0063 in.)
                     Maximum tip clearance: 0.16 mm (0.0063 in.)
              If the clearance is greater than the maximum, replace the rotors
              as a set.
     A23138



              (c)    Inspect rotor side clearance.
                     Using a feeler gauge and precision straight edge, mea-
                     sure the clearance between the rotors and the precision
                     straight edge.
                     Standard clearance:
                     0.03 to 0.09 mm (0.0012 to 0.0035 in.)
                     Maximum side clearance: 0.09 mm (0.0035 in.)
              If the clearance is greater than the maximum, replace the drive
     A23139   and driven rotors. If necessary, replace the timing chain cover
              assembly.
              (d) Inspect rotor body clearance.
                     Using a feeler gauge, measure the clearance between
                     the driven rotor and the body.
                     Standard clearance:
                     0.250 to 0.325 mm (0.0098 to 0.0128 in.)
                     Maximum body clearance: 0.325 mm (0.0128 in.)
              If the clearance is greater than the maximum, replace the drive
              and driven rotors. If necessary, replace the timing chain cover
     A23140   assembly.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo