Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra lu2uzfe oaf repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

LU-2
       LUBRICATION (2UZ-FE)   -   OIL AND FILTER
                                                                                  LU0GW-07


                     REPLACEMENT
                     CAUTION:
                      S  Prolonged and repeated contact with mineral oil will
                         result in the removal of natural fats from the skin,
                         leading to dryness, irritation and dermatitis. In addi-
                         tion, used engine oil contains potentially harmful
                         contaminants which may cause skin cancer.
                      S  Care should be taken, therefore, when changing en-
                         gine oil to minimize the frequency and length of time
                         your skin is exposed to used engine oil. Protective
                         clothing and gloves that cannot be penetrated by oil
                         should be worn. The skin should be thoroughly
                         washed with soap and water, or use water-less hand
                         cleaner, to remove any used engine oil. Do not use
                         gasoline, thinners, or solvents.
                      S  In order to preserve the environment, used oil and
                         used oil filters must be disposed of only at desig-
                         nated disposal sites.
                     1.  w/ Oil filter change:
                         REMOVE ENGINE UNDER COVER
                     2.  DRAIN ENGINE OIL
                     (a) Remove the oil filler cap.




                     (b)   Remove the oil drain plug and gasket, and drain the oil
                           into a container.




            B07231



                     3.    REPLACE OIL FILTER
                     (a)   Using SST, remove the oil filter.
                           SST 09228-07501
                     (b)   Clean the oil filter contact surface on the oil filter mount-
                           ing.
         SST
                     (c)   Lubricate the filter rubber gasket with clean engine oil.



            B07232
                                                                                                               LU-3
            LUBRICATION (2UZ-FE)          -     OIL AND FILTER

                             (d)        Tighten the oil filter by hand until the rubber gasket con-
                                        tacts the seat of the filter mounting.




                    B07233



                             (e)        Using SST, give it an additional 3/4 turn to seat the filter.
   SST                                  SST 09228-07501
                             4.         REFILL WITH ENGINE OIL
                             (a)        Clean and install the oil drain plug with a new gasket.
         3/4 Turn                       Torque: 39 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo