Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa fdc repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

SA-46
                         SUSPENSION AND AXLE   -   FRONT DIFFERENTIAL CARRIER
                                                                                               SA1K4-02



 Socket Wrench
                                       REPLACEMENT
                       SST
                                       1.    REPLACE COMPANION FLANGE DUST DEFLECTOR,
                                             IF NECESSARY
                                       (a)   Using SST, a socket wrench and a press, remove the dust
                                             deflector.
                                             SST 09950-00020


                              R04465



                                       (b)   Using SST and a press, install a new dust deflector.
                                             SST 09636-20010


                       SST




                              R04348



                                       2.    REPLACE INTERMEDIATE SHAFT NO. 2, IF NEC-
                                             ESSARY
                                       (a)   Remove the clutch hub.
                                             (1) Using a snap ring expander, remove the snap ring.
                                             (2) Remove the clutch hub from the intermediate shaft
                                                 No. 2.



                              Z03857



                                       (b)   Remove the oil seal.
                                             Using SST, remove the oil seal from the tube.
                                             SST 09308-00010




                 SST

                              R13199



                                       (c)   Remove the intermediate shaft No. 2 from the tube.
                                             (1) Using needle nose pliers, remove the snap ring.
                                             (2) Remove the shaft from the tube.
                                       (d)   Remove the intermediate shaft No. 2 bearing.
                                             (1) Using a snap ring expander, remove the snap ring.




                              R13422
                                                                                             SA-47
                      SUSPENSION AND AXLE    -   FRONT DIFFERENTIAL CARRIER

                                           (2)Using SST, a brass bar and press, remove the bear-
                      SST
                                              ing.
                                           SST 09950-00020




                            R13420



                                     (e)   Install a new intermediate shaft No. 2 bearing.
                                           (1) Using SST and a press, install a new bearing.
                                           SST 09309-37010
                                           (2) Using a snap ring expander, install a new snap ring.
                      SST
                                     (f)   Install the intermediate shaft No. 2 to the tube.
                                           (1) Install the shaft into the tube.
                                           (2) Using needle nose pliers, install a new snap ring.

                            R13421



                                     (g)   Install a new oil seal.
                                           (1) Using SST and a plastic hammer, install a new oil
                                                  seal.
                                           SST 09223-15020
                                           Oil seal drive in depth: 5.5 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo