Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa fds disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                                                     SA-31
             SUSPENSION AND AXLE   -   FRONT DRIVE SHAFT
                                                                                      SA09I-04


                           DISASSEMBLY
                           1.    CHECK DRIVE SHAFT
                           (a)   Check to see that there is no remarkable play in the out-
                                 board joint.
                           (b)   Check to see that the inboard joint slides smoothly in the
                                 thrust direction.
                           (c)   Check to see that there is no remarkable play in the radial
                                 direction of the inboard joint.
                  F06646
                           (d)   Check the boots for damage.

                           2.    REMOVE INBOARD AND OUTBOARD JOINT BOOT
                                 CLAMPS
                           (a)   Using pliers, pinch the claws to compress the large in-
                                 board joint boot clamp and remove it.
                           (b)   Using a side cutter, cut the small inboard joint boot clamp
                                 and remove it.
                           (c)   Using a side cutter, cut the 2 outboard joint boot clamps
                                 and remove them.
                  F07259



                           3.   REMOVE INBOARD JOINT SHAFT FROM OUTBOARD
                                JOINT SHAFT
                           (a) Place matchmarks on the inboard and outboard joint
                                shafts.
                           NOTICE:
                           Do not punch the marks.
                           (b) Using a snap ring expander, pull out the outboard joint
Matchmarks                      shaft while expanding the snap ring.
                  W03190   4.   REMOVE INBOARD AND OUTBOARD JOINT BOOTS

                           5.   REMOVE DUST SEAL
 SST                       Using SST and a press, remove the dust seal.
                                SST 09950-00020




                  F06647



                           6.   REMOVE DUST COVER
                           Using SST and a press, remove the dust cover.
SST
                                SST 09950-00020




                  F06648

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo