Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa fds remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                          SA-29
      SUSPENSION AND AXLE   -   FRONT DRIVE SHAFT
                                                                           SA09H-06


                    REMOVAL
                    1.    REMOVE FRONT WHEEL
                    2.    REMOVE ENGINE UNDER COVER
                    3.    DRAIN DIFFERENTIAL OIL
                    4.    REMOVE DRIVE SHAFT LOCK NUT
                    (a)   Using a screwdriver and hammer, remove the grease cap.




                    (b)   Remove the cotter pin and lock cap.
                    (c)   While applying the brakes, remove the lock nut.
                    5.    DISCONNECT LOWER SUSPENSION ARM FROM
                          LOWER BALL JOINT
                    (a)   Remove the cotter pin and nut.




           F06624



                    (b)   Using SST, disconnect the lower suspension arm from the
                          lower ball joint.
                          SST 09628-62011
                    6.    DISCONNECT DRIVE SHAFT FROM STEERING
                          KNUCKLE
                    (a)   Using a plastic hammer, disengage the drive shaft from
                          the axle hub.
SST

           R12863



                    (b)  Push the steering knuckle outward and disconnect the
                         drive shaft from the steering knuckle.
                    NOTICE:
                    Be careful not to damage the oil seal, boots and dust seal.
                    7.   LH drive shaft:
                         REMOVE LH SHOCK ABSORBER (See page SA-63)



           R13233
SA-30
             SUSPENSION AND AXLE     -   FRONT DRIVE SHAFT


 RH              SST         8.   REMOVE DRIVE SHAFT
        LH
                             (a)  RH drive shaft:
                                  Using a brass bar and hammer, remove the RH drive
                                  shaft.
                             NOTICE:
                             Be careful not to damage the dust cover and oil seal.
                             (b) LH drive shaft:
                                  Using SST, remove the LH drive shaft.
                                  SST 09520-01010, 09520-24010 (09520-32040)
                             NOTICE:
              SST            Be careful not to damage the dust cover and oil seal.
                             (c) Using a screwdriver, remove the snap ring from the in-
                                  board joint shaft.




                    F07267

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo