Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa flsa repl
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download repl documenatation <<
Text preview - extract from the document
SA-76
SUSPENSION AND AXLE - FRONT LOWER SUSPENSION ARM
SA1KJ-03
REPLACEMENT
1. REPLACE BUSHING
(a) Using a chisel and hammer, pry up the flange of the bush-
ing.
(b) Using SST and a press, remove the bushing.
SST 09613-26010, 09632-36010, 09950-00020
SST
SST
W01884
(c) Using SST, a press and steel plate, install a new No. 1
Steel Plate Mark
bushing.
SST 09502-12010, 09631-12090
HINT:
Before installing the bushing, set it in the correct direction, as
shown in the illustration.
Mark F07275
(d) Using SST, a press and steel plate, install a new No. 2
Steel Plate Marks bushing.
SST 09631-12090, 09950-60020 (09951-00680)
HINT:
Before installing the bushing, set it in the correct direction, as
shown in the illustration.
2. REPLACE NO. 1 AND NO. 2 SPRING BUMPERS
ON-VEHICLE
F07276 (a) Remove the front wheel.
Removal Installation (b) Using SST, replace the No. 1 spring bumper.
SST 09922-10010
HINT:
At the time of installation, use a torque wrench with a fulcrum
length of 345 mm (13.58 in.).
Torque: 23 N◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo